User guide

22 www.AutoEnginuity.com
If you no longer need to watch a sensor you can remove it from
the list by selecting Off from the drop-down list.
Meters will report the current status of the sensor through color
cues. If the sensor is at 80 - 90% of its capacity, the meter will
change its color to yellow. If the sensor is between 90 - 100%, the
meter will change to red. Anything else, the meter will display in
green.
Along the bottom of each meter is a bar that shows the current
position of the sensor in the range of the sensor. The farther right it
is, the farther along in the range the sensor is reporting.
Finally, the units of measure for each meter is reported on the
right-hand size running vertically down. This information will
change according to the sensor reporting and the units of measure
selected.
Before purchasing a used vehicle, bring your
AutoEnginuity ScanTool and verify the vehicle’s
condition.