Technical data

LVD TEST REPORT
Report Numbe r : KSQ-LVD 081010
Clause Requirement - Te st Result - Remark Verdict
Page 45 / 63
Fail-safe transformers comply with subclause 15.5
of IEC 61558-1
N
22
Construction
N
Subclauses 19.1 and 19.1.2 of IEC 61558-2-6 are
applicable
N
29
Clearances, creepage distances and solid insulation
N
29.1 and
29.2
The distances specified in items 2a, 2c and 3 in
table 13 of IEC 61558-1 apply
N
H ANNEX H (NORMATIVE) SWITCHES N
Switches comply with the following clauses of IEC 61058-1, as modified:
N
-The tests of IEC 61058-1 carried out under the
conditions occurring in the appliance
N
-Before being tested, switches are operated 20
times without load
N
8 Marking and documentation N
Switches are not required to be marked N
However, switches that can be tested separately
from the appliance marked with the manufacturer’s
name or trade mark and the type reference
N
13
Me ch anism
N
The tests may be carried out on a separate sample
N
15
Insulation resistance and dielectric strength
N
15.1 Not applicable N
15.2 Not applicable N
15.3
Applicable for full disconnection and
micro-disconnection
N
17 Endurance N
Compliance is checked on three separate
appliances or switches
N
For 17.2.4.4, the number of cycles is 10 000, unless
otherwise specified in 24.1.3 of the relevant part 2 of
IEC 60335
N
Switches for operation under no load and which can
be operated only by a tool and switches operated by
hand that are interlocked so that they cannot be
operated under load, are not subjected to the tests
N