Technical data

LVD TEST REPORT
Report Numbe r : KSQ-LVD 081010
Clause Requirement - Te st Result - Remark Verdict
Page 42 / 63
19.101
Appliances supplied at rated voltage for 168 h, the
battery being continually charged
N
19.102
Short-circuiting of the terminals of the battery, being
fully charged, for appliances having batteries that
can be removed without the aid of a tool
N
19.103
Appliances having batteries replaceable by the user
supplied at rated voltage under normal operation
withthebatteryremovedorinanypositionallowed
by the construction
N
21.101
Appliances having pins for insertion into
socket-outlets have adequate mechanical strength,
che cke d accord ing to pro ce d ure 2 of IEC 68-2-3 2
N
Part of the appliance incorporating the pins subjected to the free fall test, procedure
2, of IEC 60068-2-32, the number of falls being:
N
- 100, the mass of part does not exceed 250 g N
- 50, the mass of part exceeds 250 g
N
After the test, the requirements of 8.1, 15.1.1, 16.3
and clause 29 are met
N
22.3
Appliances having pins for insertion into
socket-outlets tested as fully assemb led as possible
N
25.13
An additional lining or bushing not required for
interconnection cords operating at safety extra-low
voltage
N
30.2
For parts of the appliance connected to the supply
mains during the charging period, 30.2.3 applies
N
For other parts, 30.2.2 applies
N
C ANNEX C (NORMATIVE) AG EING TEST ON MOTORS
Tests, as described, carried out when doubt with
rega rd to the temp e ra ture classificatio n of the
insulation of a motor winding
N
D
ANNEX D (NORMATIVE) ALTERNATIVE REQUIREMENTS FOR PROTECTED
MOTORS
Applicable to protected motors for unattended use,
test of 19.7 carried out on a separate sample
accor ding to the specific ation
N
E ANNEX E (NORMATIVE) NEEDLE-FLAME TEST