Technical data

LVD TEST REPORT
Report Number : KSQ-LVD081010
1. General Information
1.1 Introduction
The LVD Test Report fo r CE Declara tion o f Co nformity is prepare d on b eha lf of na m ed applicant in acco rdan ce w ith
the Low Voltage Direc tive (2006/9 5/E C ) of the Eu rope an Econ omic C o m m u nity . The test results reported in this
docu m en t relate only to the item that was tested.
All measurements contained in this report were conducted in accordance with EN60335-1:1994+A1/+A2/+A11
/+A 12/+ A 1 3/+ A 14/+ A 15/+ A 1 6, EN 603 35-2 -49:2 003 Safety of househo ld and similar electrical appliances - Part
2-49 : Particular requirements for commercial electric hot cupboards.
All measurem en ts req uired by the Lo w Voltage Directiv e were performed manua lly at Ko rea Stand ard Qua lity
Laboratories (hereinafter called KSQ), #102, Jangduk-Dong, Hwasung-Si, Gyeonggi-Do, KO REA. The KSQ test
facilities in Hw a sung -Si are designated EM C and Safe ty testing laboratory according to ISO/IEC 1702 5 by Radio
Research Laboratory (RRL), Ministry of Information and Communication.
1.2 Product Description for Equipment Under Test (EUT)
DA E WOO EN E R T EC Co., Ltd.'s .Electric Heatin g Film, Mo del No: DW 0 50-1 00W220V , or the "EUT " as
referred to turn on the pow er of requirements and let the EU T work in test mod e(m a x load) and test it.
1.3 General Requirements
Equipment Classification :
Equ ip m en t Mo bility ···································· ☑ Movable □ Hand-held □ Stationary
Op eratin g Cond ition ··································· ☑ Continuous □ Short-tim e □ Interm itte nt
Tested for IT Power Systems ········· ······· ··· ··· □ Yes ____V phase-phase ☑ No
Class of Equipment ····································· □ Class I ☑ Class II □ Class III
Size of Equipment ······································ 980 × 780 × 15
Protection against ingress of water ············· IP X0
Test Environments :
Ambient Temperatures ···· ···· ·········· ···· ····· ···· 15°C to 35°C
Relative Humidity ······································ 40% to 60%
Atm o sphe ric Pressure ································· 860 m bar to 1060mbar
Test Case Verdicts :
Test item does meet the requirements ·········· P (Passed)
Test item does not meet the requirements ···· F (Failed)
Test case does not apply to the test object ··· N (N/A - Not Applicable)