Technical data

LVD TEST REPORT
Report Numbe r : KSQ-LVD 081010
Clause Requirement - Te st Result - Remark Verdict
Page 23 / 63
22.44
Appliances are not allowed to have an enclosure
that is shaped and decorated so that the appliance
is likely to be treated as a toy by children
P
22.45
When air is used as reinforced insulation,
clearances not reduced below the values specified
in 29.1.4 due to deformation as a result of an
external force applied to the enclosure
N
23
INT E R NAL W IR ING
23.1 Wireways smooth and free from sharp edges N o sharp edges N
Wires protected against contact with burrs, cooling
fins etc.
N
Wire holes in metal well rounded or provided with
bushings
N
Wiring effectively prevented from coming into
contact with moving parts
N
23.2
Beads etc. on live wires cannot change their
position, and are not resting on sharp edges or
corners
No beads N
Beads inside flexible metal conduits contained
within an insula ting sleeve
See above N
23.3
Electrical connections and internal conductors
movable relatively to each other not exposed to
undue stress
No such electrical connections
and internal conductors
N
Flexible metallic tubes not causing damage to
insulation of conductors
N
Open-coil springs not used
No open-coil springs N