Technical data

LVD TEST REPORT
Report Numbe r : KSQ-LVD 081010
Clause Requirement - Te st Result - Remark Verdict
Page 19 / 63
Adequate insulating properties of oil or grease to
which insulation is exposed
N
22.10
Location or protection of reset buttons of
non-self-resetting controls is so that accidental
re setting is unlikely
No reset buttons of
non-se lf-resettin g controls
N
22.11
Reliable fixing of non-detachable parts that provide
the necessary degree of protection against electric
shock, moisture or contact w ith moving parts
Co m p lied P
Obvious locked position of snap-in devices used for
fixing such parts
No snap-in devices N
No deterioration of the fixing properties of snap-in
devices used in parts that are likely to be removed
during installation or servicing
N
Tests as described
N
22.12 Handles, knobs etc. fixed in a reliable manner No handles, knobs N
Fixing in wrong position of handles, knobs etc.
indicating position of switches or similar
components not possible
See above N
Axial force 15 N applied to parts, the shape being so
that an axial pull is unlikely to be applied
N
Axial force 30 N applied to parts, the shape being so
that an axial pull is likely to be applied
N
22.13
Unlikely that handles, whe n gripped as in normal
use, make the operators hand touch parts having a
temperature rise exceeding the value specified for
handles which are held for short periods only
N
22.14
No ragged or sharp edges creating a hazard for the
user in normal use, or during user maintenance
Co m p lied P
No exposed pointed ends of self tapping screws
etc., liable to be touched by the user in normal use
or during user maintenance
Co m p lied P
22.15
Storage hooks and the like for flexible cords smooth
and well rounded
No storage hooks N
22.16
Automatic cord reels cause no undue abrasion or
damage to the sheath of the flexible cord, no
breakage of conductors strands, no undue wear of
contacts
No automatic cord reels N
Cord reel tested with 6000 operations, as specified
See above N
Electric strength test of 16.3, voltage of 1000 V
applied
N