Specifications

94
SPECIAL FUNCTIONS
FORD CODED ACCESS
UK ONLY PROCEDURE
When connected to a coded access vehicle with AD100 and Special Functions
selected, the following options will be displayed:
CLEAR PATS
ADD KEY (One code allows one key to be programmed. To add more than
one key the procedure must be repeated and another code applied for, and
charged)
When either option is selected the AD100 will display a 10 digit ‘Out Code ‘
example : 1267845682
Type the following text message:
ask ford ********** (Replace * with the 10 digit Out Code)
Send text to 60999
Within 30 minutes you will receive two text messages as follows:
Text 1 - In Code eg 4257845672
Text 2 – Confirmation of the service (necessary for this type of service)
Enter this ‘In Code’ on the AD100 and press ENTER
If successful the message ‘Access Gained’ will be displayed on the tester, then continue
to follow the instructions displayed on the AD100.
Important
DO NOT disconnect AD100 during this procedure, otherwise another code
will be required ie another £10.
If an incorrect transponder is used during the ADD KEY function, another code will
be required ie another £10.
Notes
Each In Code that you receive back will be charged on your mobile telephone statement
at a charge of £10 (made up of the two text messages detailed above).
A text reply will be sent within 30 minutes.
The text conversion service will be available from 8.00 am to 4.30pm Mon to Thurs and
8.00am to 2.00pm Friday. No conversions by phone, whatever the circumstances.
NO EXCEPTIONS.
6