Specifications

91
SPECIAL FUNCTIONS
CLEARING PATS SYSTEM (FALCON)
6
FALCON P.C.M. PATS
PRESS ENTER KEY
Wait for door locks to cycle and then
press ENTER key.
Disconnect AD100 from vehicle.
Wait 30 seconds after disconnecting
AD100
Insert one of the keys into the ignition
and turn IGNITION ON.
Wait a further 30 seconds and the con-
nect AD100 to vehicle again.
Continue to the same screen as previ-
ously but select P.C.M. And press
ENTER.
Screen will display PCM PATS system.
Select SEPCIAL FUNCTIONS and Press
enter key. Select PARAMETER RESET and
press enter key.
Follow on screen instructions, as the sys-
tem will take the require Ford Timed ac-
cess security wait time.
At the end of the time, the doors will cy-
cle from LOCKED to UNLOCKED.
Disconnect AD100.
Switch Ignition to the OFF position, and
then switch IGNITION to the ON position
with the same key.
The door locks will again cycle from
LOCKED to UNLOCKED.
SPECIAL FUNCTIONS
DIAGNOSTIC MENU
PRESS ENTER KEY
CLEAR PATS 3 SYSTEM
>PARAMETER RESET
DIAGNOSTIC MENU
PRESS ENTER KEY