Specifications

8
GENERAL OPERATION
INITIAL OPERATION
After the correct cables and adaptor has been connected to the
vehicle the AD100 will power up and the intial screen will be the
contrast adjust. The screen will cycle between dark and light, and
will stop as soon as a key is pressed.
Use the UP and DOWN arrows to adjust the contrast, then press
the ENTER key.
The following sceen will be displayed.
Using the UP and DOWN arrows select the required manufacturer,
and then press the ENTER key.
1
FIG 7
FIG 8
> FORD
GM
LDV
ROVER
VAG
DIAGNOSTIC MENU
PRESS ENTER KEY