Specifications

TIPS & HINTS

When you have programmed keys, and the vehicle will not start

even though the programming was successful, follow these instruc-

tions :

• The learn time for the engine control unit is very slow on this

car.

• You will have to program the keys and then leave the vehicle

alone for at least 30 minutes without the ignition OFF.

• If still no success, then disconnect the battery for 10 minutes

and then test keys.

When inserting a NEW unprogrammed key DO NOT try and start the

car otherwise the Engine and Immobiliser ECU will lock. If this hap-

pens turn the ignition OFF and then back ON again to reset.

Musso diesel with a NEW unprogrammed key will start but WILL NOT

rev.