Specifications

GENERAL OPERATION

IMMOBILISER SYSTEM

INTRODUCTION

The immobiliser system provides theft protection using the ignition

key and transponder device. An LED is used to indicate the immobi-

liser status. The immobiliser control unit communicates to the engine

management unit when a valid key code is received and sends a se-

curity code to enable starting. If a valid key is used, the LED indi-

cates the correct key status, if an incorrect key is used a fault code

is set and the LED indicates an incorrect key status.

TRANSPONDER KEY

The transponder key consist of a 96bit crypto algorithm secret key

code which is transmitted via an aerial mounted around the ignition

key barrel.

CENTRAL LOCKING SYSTEM

INTRODUCTION

The remote keyless entry and anti-theft system fitted to the range of

Daewoo vehicles performs the following functions :-

• Remote unlocking of doors

• Sense of vehicle break in via doors, boot or bonnet.

• Sounding of warning device

• Locking of doors if the vehicle door or boot has not been

opened after 30 seconds of unlocking using the remote plip.

• Sense movement inside vehicle if ultrasonic sensors are fit-

ted.

COMPONENTS

• Remote entry module receiver control unit

• Security LED

• Boot open switch

• Boot tamper switch

• Front Door tamper switches

• Door open switches

• Central locking control unit

• Sounder

• Bonnet open switch

• Ultrasonic options (Optional)