Specifications

56
TIPS & HINTS
PEUGEOT & CITROEN
TRANSPONDER KEYS
1. After Programming Keys on all vehicles, clear fault codes before
trying each key. This enables the key programming system, and
saves having to wait for 5 minutes for system to reset.
2. When programming keys on all Citroen and Peugeot vehicles en-
sure all doors and hatchback doors are closed.
3. If the battery is disconnected on a C5 vehicle, you must wait at
least 2 minutes after re-connection before trying anything, as the
immobiliser enters lockout for 2 minutes after battery disconnection.
PEUGEOT & CITROEN
When programming keys on Peugeot 206 with MUX (Multiplex and a
comb's 2000 unit)- it is important to note that there are two differ-
ent types of remote. Although both the keys look exactly the same
(2 button- one large, one small) if you use the wrong remote you
will be able to program the transponder but the remote will not
work. The remotes are identified by whether the vehicle has front
fog lights or not.With front fog lights part number 6554.K2
Without front fog lights part number 6554.K1
3
VEHICLE KEY TYPE IDENT
COLOUR
PART NO
SAXO STANDARD GREY 9926GY
XSARA STANDARD
GREY SERVICE KEY
PLIP BLADE
STANDARD KEY (MULTIPLEX)
BLACK
BLACK
BLACK
9926FF
9926JZ
9926FG
9926LE
XSARA PICASSO STANDARD 9926LE
XANTIA STANDARD
PLIP BLADE
GREEN
GREEN
9926HC
9926HA
C5 STANDARD 9926LE
SYNERGIE STANDARD
PLIP BLADE
BLACK
BLACK
9926FF
9926FG
BERLINGO STANDARD
STANDARD (MULTIPLEX)
GREY 9926GY
9926LH
DISPATCH STANDARD BLACK 9926FF
RELAY STANDARD 9926CF