Specifications

54
SPECIAL FUNCTIONS
PROGRAMMING KEYS—BSi MODULE
3
PROGRAM KEYS
DIAGNOSTIC MENU
PRESS ENTER KEY
SECURITY CODE
_ _ _ _
SECURITY CODE
X 4 Y T
IS THIS CORRECT
OK=ENTER CLEAR=BACK
ECU IDENTIFICATION
FAULT CODES
LIVE DATA
ACTUATORS
SPECIAL FUNCTIONS
DIAGNOSTIC MENU
PRESS ENTER KEY
Select SPECIAL FUNCTIONS from the
Diagnostic Menu using the UP and
DOWN arrows.
Then press the ENTER key.
NOTE : ENSURE ALL DOORS ARE
CLOSED WHEN KEY PROGRAMMING IS
BEING PERFORMED.
Using the UP and DOWN keys select
the PROGRAM KEYS option
To enter the security code use the fol-
lowing procedure :-
Press   to select Number & Letter
Press  To Erase the previous selec-
tion
Press 8 To ENTER selection.
Press 8 To Finish PIN selection.
NOTE : AFTER PROGRAMMING CLEAR
FAULT CODES AND LOCK VEHICLE FOR
10 MINUTES BEFORE TRYING THE KEY
OR PLIP.
WARNING : WHEN PROGRAMMING KEYS, THE SYSTEM
AUTOMATICALLY ERASES THE PLIP KEYS AT THE SAME
TIME. BEFORE PROCEEDING WITH KEY PROGRAMMING,
ENSURE YOU HAVE THE PLIP KEY PROGRAMMING
PROCEDURE.