Specifications

5
INTRODUCTION
PRODUCT DESCRIPTION
The AD100 is an Advanced Serial Diagnostic system which has been designed
and developed to offer the most advanced diagnostic capabilities.
The AD100 can be used as a hand held portable diagnostic system, and is
equipped with 64MB of RAM which is used for the application data, and 4MB of
Flash for the protocol handling system. In addition to this it has a RS232
interface connection for transferring application data from a PC and printing.
The unit has a 128x64 Dot Matrix Back Lit LCD TFT display along with
membrane keypad.
The unit is capable of reading fault codes, clearing fault codes, displaying live
data, performing special functions, and recording live data both statically and on
the road.
The unit is powered from the vehicle battery, and connects to the serial
diagnostic connector through a 25way D-Type cable system.
POWER CONNECTION
The unit is powered by the vehicles 12 volts battery which is connected to the
diagnostic socket. If no power is available through the vehicle diagnostic socket
then the adapter cable will have the vehicle battery connections.
VEHICLE CONNECTION
The master cable AD110 is used to connect the equipment to the various
adapters available for the different vehicle connector types.
This system enables the equipment to be kept up to date with the various
diagnostic connectors at a reasonable cost.
LCD BACKLIGHT
The LCD BACKLIGHT is automatically switched on when the unit has power. This
cannot be switched off or adjusted. If the unit is not used for a period of time
the LCD backlight will automatically switch off, and as soon as any key is
pressed it will switch back on again.
1