Specifications

32
SPECIAL FUNCTIONS
CAN BUS SYSTEM (DURANGO)—PROGRAM KEYS/ERASE KEYS
2
WARNING
FOLLOW NEXT SCREENS
QUICKLY & CAREFULLY
COMPLETE OPERATION
WITHIN 60 Sec.
AFTER HEARING THE CHIME
PRESS ENTER KEY
PROGRAMMING REMOTES
PRESS LOCK & UNLOCK
CHIME WILL BE HEARD
WHEN FOB IS PROGRAMMED
REPEAT FOR ALL FOBS
PRESS ENTER KEY
After the PIN CODE and CHALLENGE
RESPONSE CODES have been ENTERED,
this screen should be displayed.
Then
1. Sit in drivers seat, and make sure all
doors are closed.
2. Put seat belt on, and make sure no
one else is in the vehicle.
3. Once you enter remote control pro-
gramming a CHIME will be heard.
4. Press the LOCK and UNLOCK buttons
together for 1 second and then quickly
press the UNLOCK button for 1 second.
Remember you have limited time for
this.
Press ENTER when complete.
CAN BUS SYSTEM (DURANGO)—REMOTE PROGRAMMING
NOTE : The remote control programming procedure is the same
as the key programming, until you reach the screen above then
FOLLOW these instructions carefully.