Specifications

274

SPECIAL FUNCTIONS

PROGRAMMING ADDITIONAL KEYS (Contd)

Procedure

1. The Key already in the ignition will now be programmed, ie. Key 1

2. Remove Key 1.

3. Insert Key 2 and turn ignition on. for 2 seconds. Then remove key

4. Insert Key 3 and turn ignition on. for 2 seconds. Then remove key

5. Repeat for all keys.

6. Try all the keys to ensure they work.

7. Check for any fault codes that may have been set, and clear the

memory.

NOTE : The maximum number of keys that can be programmed is 8.

PIN CODE READING

Pin code reading is possible only on certain vehicles, and will depend on

what dashboard components are fitted.

NOTE : The Pin code reading will not work on any System 1 vehicles.

A guide to the vehicle list that we have had success on is shown below,

but we cannot guarantee success on all vehicles as many vehicle vary

depending on country of manufacture and specification.

Any Audi dash panel with a 14 digit immobiliser number that

starts "AUZ7Z" reads the PIN code with AD100 no problem

VW MODELYEAR

Passat 97-01

Golf 97-01

Beetle 99

Bora 97-01

SEAT

Cordoba 97-01

SKODA

Octavia 97-01

AUDI

A3 97-01

A4 97-01

A6 97-01

A8 97-01