Specifications

258
SPECIAL FUNCTIONS
RESET IMMOBILISER
ADD MASTER KEY
23
RESET IMMOBILISER
ADD MASTER KEY
ADD VALET KEY
ERASE KEYS
DIAGNOSTIC MENU
RESET IMMOBILISER
GAINING ACCESS
TIME REQUIRED 16:00
TIME ELAPSED 0:28
RESET IMMOBILISER
PROCEDURE COMPLETE
PRESS ENTER KEY
NOTE : This will cause ALL keys to be erased
and the immobiliser to RESET
itself.
Do NOT be impatient. Some vehicles go past 16
minutes.
If the timer goes past 35 Minutes, stop discon-
nect the AD100 and wait 20 seconds and try
again.
NOTE 1 : Remove the master key and discon-
nect the AD100.
Depending on the system fitted it will now be in
2 possible modes ..
1. The vehicle has learned the key that was in
the ignition and has closed the learning cy-
cle automatically. This happens on some
Camry and Land Cruiser models.
2. The vehicle is now in Auto Learn Mode.
Auto Learn mode is indicated by the steady
illumination of security Light.
NOTE 2 : If the security light is out, the Auto
learn mode is closed and additional keys can be
programmed with AD100.
If the security light is ON steady then Auto
learn is enabled and keys can now be pro-
grammed.
Insert key (DO NOT TURN ON), wait for 4 sec-
onds and remove key. Repeat for all keys to be
programmed. The last key programmed will
automatically be set as the VALET key.
To exit programming press the BRAKE pedal
fast 6 times, with the Master key inserted.
RESET IMMOBILISER
ADD MASTER KEY
ADD VALET KEY
ERASE KEYS
DIAGNOSTIC MENU
ADD MASTER KEY
WARNING
FOLLOW NEXT SCREENS
QUICKLY & CAREFULLY
PRESS ENTER KEY