Specifications

251
GENERAL OPERATION
TOYOTA IMMOBILISER— REMOTES—TYPE 2
ADD REMOTE
Procedure
1. Make sure no keys are in the ignition lock and the drivers door is open and
unlocked.
2. Put the key in the ignition and remove it.
3. Press the lock button for 1 second, press the unlock button for 1 second
and repeat 5 times.
4. Close the drivers door and open it.
5. Press the lock button for 1 second, press the unlock button for 1 second
and repeat 5 times.
6. Put the key in the ignition.
7. Turn ignition ON for 1 second and then off and remove key.
8. The power door locks should cycle once.
9. Press the unlock button for 2 seconds.
10. If the remote is programmed the doors will cycle once. If failed the doors
will cycle 2 times.
11. Open drivers door to end procedure.
ERASE REMOTE
Procedure
1. Make sure no keys are in the ignition lock and the drivers door is open and
unlocked.
2. Put the key in the ignition and remove it.
3. Press the lock button for 1 second, press the unlock button for 1 second
and repeat 5 times.
4. Close the drivers door and open it.
5. Press the lock button for 1 second, press the unlock button for 1 second
and repeat 5 times.
6. Put the key in the ignition.
7. Turn ignition ON for 1 second and then off for 1 second then on for 1 sec-
ond and remove key.
8. The power door locks should cycle 2 times.
9. Press the lock and unlock button for 2 seconds, then press the unlock for 1
second.
10. If the remote is programmed the doors will cycle once. If failed the doors
will cycle 2 times.
11. Open drivers door to end procedure.
23
MODEL YEARS ADD REMOTE SYSTEM
Land Cruiser 2001-2002 On Board
Programming
Not
Applicable
Land Cruiser 2003-2004 AD100 2
ERASE REMOTE
On Board
Programming
AD100