Specifications

250
GENERAL OPERATION
TOYOTA IMMOBILISER—REMOTES—TYPE 2
COMPATIBLE TRANSPONDER KEYS FOR THESE MODEL’S
Procedure
1. Open the driver’s door.
2. Within 5 seconds, put the remote into the remote opening and remove 2
times
3. Close the drivers door and open again 2 times
4. Put the remote in the remote opening and remove
5. Close the drivers door and open again 2 times
6. Out the remote in the remote opening and close ALL doors.
7. Turn the Power switch on for 1 second and then off.
8. Remove remote from remote opening.
9. The power door locks should now cycle 1 time.
10. Press the unlock and lock buttons at the same time for 1 second and then
quickly press the unlock button for 1 second.
11. If the remote has been accepted the door locks should cycle once. If failed
the door locks will cycle 2 times.
12. Open drivers door to end procedure.
23
TOYOTA FACTORY REMOTE MASTER KEYS
MODEL YEARS FACTORY PART NOTES
Prius 2004 Smart Access System
NOTE : IF YOU ARE USING THE WRONG TYPE OF KEY, THE PROCEDURES
WILL NOT WORK.
NO AFTERMARKET KEYS WILL WORK FOR THESE MODEL TYPES.
PLEASE USE ORIGINAL KEYS ONLY