Specifications

226
SPECIAL FUNCTIONS
PROGRAMMING EKA CODE
20
To program a new EKA code select spe-
cial functions from the menu and press
ENTER.
Select write EKA code.
Insert new EKA code. Please make a
note of this and advise the customer.
If correct press enter to proceed.
After the code has been programmed,
disconnect the AD100 and then re-
connect to check the code has been
written correctly.
READ EKA CODE
SPECIAL FUNCTIONS
DIAGNOSTIC MENU
PRESS ENTER KEY
WRITE EKA CODE
DIAGNOSTIC MENU
PRESS ENTER KEY
SECURITY CODE
_ _ _ _
SECURITY CODE
1 2 3 4
IS THIS CORRECT
OK=ENTER CLEAR=BACK
DISCONNECT AD100
FROM VEHICLE