Specifications

223

GENERAL OPERATION

ENGINE IMMOBILISATION OVERRIDE

If the Plip key is lost or does not function, the emergency access code

(EKA) can be used to override the system as follows :-

1. Insert the key into the drivers lock, and turn to the lock position.

2. Hold the key in this position for 5 seconds.

3. Now using the code turn the key to the unlock the number of times of

the first digit.

4. Now turn the key to the lock position the number of times of the sec-

ond digit.

5. Repeat for the last two digits.

6. After the code has been entered, turn the key to the unlock position,

and check to see whether the Alarm LED has stopped flashing, and

the engine will start.

If an error is made, open and close the door and repeat the sequence. If 3

unsuccessful attempts are made, the system will lock out for 10 minutes,

before another attempt can be made.