Specifications

200
SPECIAL FUNCTIONS
17
To enter the security code use the fol-
lowing procedure :-
Press   to select Number & Letter
Press  To Erase the previous selec-
tion
Press  To ENTER selection.
Press  To Finish PIN selection.
NOTE : AFTER PROGRAMMING CLEAR
FAULT CODES AND LOCK VEHICLE FOR
10 MINUTES BEFORE TRYING THE KEY
OR PLIP.
SECURITY CODE
_ _ _ _
SECURITY CODE
X 4 Y T
IS THIS CORRECT
OK=ENTER CLEAR=BACK
WARNING : WHEN PROGRAMMING KEYS, THE SYSTEM AUTOMATI-
CALLY ERASES THE PLIP KEYS AT THE SAME TIME. BEFORE PRO-
CEEDING WITH KEY PROGRAMMING, ENSURE YOU HAVE THE PLIP
KEY PROGRAMMING PROCEDURE.
TRYING TO COMMUNICATE
PRESS ENTER KEY
SWITCH IGNITION OFF
IGNITION STATUS ON
PRESS ENTER KEY
ERASING KEYS
PROGRAMMING KEYS
If Access code is correct, ENTER the
number of keys to program.
NOTE : Max 4 keys can be added.
Follow on screen instruction for pro-
gramming the keys.