Specifications

198
SPECIAL FUNCTIONS
PROGRAMMING KEYS—IMMOBILISER 1 SYSTEM
17
PROGRAM KEYS
DIAGNOSTIC MENU
PRESS ENTER KEY
SECURITY CODE
_ _ _ _
SECURITY CODE
X 4 Y T
IS THIS CORRECT
OK=ENTER CLEAR=BACK
ECU IDENTIFICATION
FAULT CODES
LIVE DATA
ACTUATORS
SPECIAL FUNCTIONS
DIAGNOSTIC MENU
PRESS ENTER KEY
Select SPECIAL FUNCTIONS from the
Diagnostic Menu using the UP and
DOWN arrows.
Then press the ENTER key.
NOTE : ENSURE ALL DOORS ALL
CLOSED WHEN KEY PROGRAMMING IS
BEING PERFORMED.
Using the UP and DOWn keys select
the PROGRAM KEYS option
To enter the security code use the fol-
lowing procedure :-
Press   To select Number & Letter
Press  To Erase the previous se-
lection
Press  To ENTER selection.
Press  To Finish PIN selection.
If incorrect code is entered the screen
will display as shown.
NOTE : If the code is entered 3 time in-
correctly, then the ECU will lock access
for 15 minutes.
WARNING : WHEN PROGRAMMING KEYS, THE SYSTEM AUTOMATICALLY
ERASES THE PLIP KEYS AT THE SAME TIME. BEFORE PROCEEDING WITH
KEY PROGRAMMING, ENSURE YOU HAVE THE PLIP KEY PROGRAMMING PRO-
CEDURE.
INCORRECT ACCESS CODE
PRESS ENTER KEY