Specifications

193
SPECIAL FUNCTIONS
KEY PROGRAMMING—NATS 5
16
ECU IDENTIFICATION
FAULT CODES
SPECIAL FUNCTIONS
DIAGNOSTIC MENU
PRESS ENTER KEY
PROGRAM KEYS
DIAGNOSTIC MENU
PRESS ENTER KEY
SECURITY CODE
1 2 3 4
IS THIS CORRECT
OK=ENTER CLEAR=BACK
Select SPECIAL FUNCTIONS from
menu.
Select PROGRAM KEYS from selection.
Enter the 4 digit security code. Then
follow on screen instructions. The key in
the ignition will be registered first, then
program additional keys as follows :-
Turn ignition ON for 5 seconds. Then
turn off and remove key.
Repeat for up to 5 keys.
After the final key been registered, use
one of the keys to start the engine, this
returns the system to normal operation
Check NATS indicator to ensure the
procedure is complete.