Specifications

192
SPECIAL FUNCTIONS
KEY PROGRAMMING—NATS 2,3 & 4 (PETROL)
16
ECU IDENTIFICATION
FAULT CODES
SPECIAL FUNCTIONS
DIAGNOSTIC MENU
PRESS ENTER KEY
> PROGRAM KEYS
DIAGNOSTIC MENU
PRESS ENTER KEY
CLEAR NATS SYSTEM
PLEASE WAIT
Select SPECIAL FUNCTIONS from menu.
Select PROGRAM KEYS
The System takes approximately 16 minutes
to clear.
After clearing, the key in the IGNITION will be
registered. Remove the key from ignition and
insert next key.
Turn ignition ON for 5 seconds. Then turn off
and remove key.
Repeat for up to 5 keys.
After the final key been registered, use one
of the keys to start the engine, this returns
the system to normal operation
Check NATS indicator to ensure the proce-
dure is complete.
NOTE : IF ANY FAULT CODES ARE PRE-
SENT, EVEN A FAULTY FUSE THEN KEY
PROGRAMMING CANNOT BE COMPLETED.
Select SPECIAL FUNCTIONS from menu.
Select PROGRAM KEYS
After clearing, the key in the IGNITION will be
registered. Remove the key from ignition and
insert next key.
Turn ignition ON for 5 seconds. Then turn off
and remove key.
Repeat for up to 5 keys.
After the final key been registered, use one
of the keys to start the engine, this returns
the system to normal operation.
Check NATS indicator to ensure the proce-
dure is complete.
ECU IDENTIFICATION
FAULT CODES
SPECIAL FUNCTIONS
DIAGNOSTIC MENU
PRESS ENTER KEY
> PROGRAM KEYS
DIAGNOSTIC MENU
PRESS ENTER KEY
CLEAR NATS SYSTEM
PLEASE WAIT