Specifications

184
SPECIAL FUNCTIONS
KEY PROGRAMMING—ALL SYSTEMS
15
ECU IDENTIFICATION
FAULT CODES
SPECIAL FUNCTIONS
DIAGNOSTIC MENU
PRESS ENTER KEY
> PROGRAM KEYS
DIAGNOSTIC MENU
PRESS ENTER KEY
BACK TO EXIT
ENTER TO
PROGRAM NEXT KEY
INSERT NEXT KEY
SWITCH IGNITION ON
AND PRESS ENTER
WITHIN 5 SECONDS
From the main DIAGNOSTIC MENU
select the SPECIAL FUNCTIONS.
Select PROGRAM KEYS.
NOTE : The AD100 will automatically
input the correct Pin code into the sys-
tem. If it is wrong INCORRECT AC-
CESS CODE will be displayed.
NOTE : If the system has been ac-
cessed incorrectly by another piece of
equipment then a security wait time of
16 minutes is required before at-
tempting to program keys.
If further keys are required then press
the ENTER key.
Repeat this procedure for all additional
keys.
NOTE : ALL existing keys are erased
when programming is completed. En-
sure all keys are with the vehicle be-
fore programming.