Specifications

179
SPECIAL FUNCTIONS
4 Within 30 seconds of turning the key to the LOCK position, turn the ignition
key to the ON position while the security light is not illuminated. Count the
illumination flashes 2 times while the light is not illuminated and turn the
key to the lock position.
5 Within 30 seconds of turning the key to the LOCK position, turn the ignition
key to the ON position while the security light is not illuminated. Count the
illumination flashes 3 times while the light is not illuminated and turn the
key to the lock position.
6 Within 30 seconds of turning the key to the LOCK position, turn the ignition
key to the ON position while the security light is not illuminated. Count the
illumination flashes 4 times while the light is not illuminated and turn the
key to the lock position.
7 Within 30 seconds of turning the key to the LOCK position, turn the ignition
key to the ON position while the security light is not illuminated. Count the
illumination flashes 2 times while the light is not illuminated and turn the
key to the lock position.
8 Within 30 seconds of turning the key to the LOCK position, turn the ignition
key to the ON position while the security light is not illuminated. Count the
illumination flashes 2 times while the light is not illuminated and turn the
key to the lock position.
9 Within 30 seconds of turning the key to the LOCK position, turn the ignition
key to the ON position while the security light is not illuminated. Count the
illumination flashes 3 times while the light is not illuminated and turn the
key to the lock position.
10 If you have entered the code correctly the security light will stop flashing
and stay illuminated. If a mistake has been made, wait 45 seconds and try
again.
NOTE 1 : The ignition key should not be turned ON twice within one non illumi-
nation cycle.
NOTE 2 : The ignition key should not be turned ON during an illumination cycle.
NOTE 3 : The ignition key should not be turned to LOCK twice within one illumi-
nation cycle.
14