Specifications

131
SPECIAL FUNCTIONS
PROGRAMMING ADDITIONAL KEYS
FOLLOW STEPS A & B
STEP A
STEP B
9
Select PROGRAM KEYS and press the
ENTER key.
Enter number of new keys to be pro-
grammed and press ENTER.
Note: Enter ‘0’ to either rewrite/
replace the immobiliser control unit
or matching the ECM without pro-
gramming any additional keys.
If you entered more than ‘0’ when
prompted ‘TOTAL KEYS REQUIRED’ you
will be asked to perform steps A & B.
Steps A & B will be repeated for the
number of new keys that are being pro-
grammed.
Remember to use each new key when
prompted.
PROGRAM KEYS
KEY INFORMATION
DIAGNOSTIC MENU
TOTAL KEYS REQUIRED:
PROGRAM KEYS
SWITCH IGNITION OFF
PROGRAM KEYS
SWITCH IGNITION ON
WITH SAME KEY
PROGRAM KEYS
SWITCH IGNITION OFF
WITHIN 17 SEC
PROGRAM KEYS
SWITCH IGNITION ON
WITHIN 20 SEC
WITH NEXT KEY
PROGRAM KEYS
SWITCH IGNITION OFF
WITHIN 17 SEC
PROGRAM KEYS