Specifications

130
SPECIAL FUNCTIONS
TYPE 2 (a & b), 3 & 4 IMMOBILISER SYSTEMS
The following procedure is used for:
• Programming additional keys
Note:
If all keys, master key or learning key are lost then a
replacement immobiliser control unit set is required.
• Rewriting/Replacing Immobiliser control unit
• Matching the Immobiliser control unit and ECU.
9
HONDA
VEHICLE SELECTION MENU
PRESS ENTER KEY
TURN IGNITION ON
PRESS ENTER KEY
PLEASE WAIT
TRYING TO COMMUNICATE
HONDA IMMO. USA-??
ECU IDENTIFICATION
PRESS ENTER KEY
TYPE 1
TYPE 2A
TYPE 2B
TYPE 3
TYPE 4
VEHICLE SELECTION MENU
PRESS ENTER KEY
At the VEHICLE SELECTION menu select
the required vehicle and press the
ENTER key.
Select the immobiliser system type from
the application list and press the ENTER
key.
Turn Ignition ON and press the ENTER
key.
The AD100 will now attempt to commu-
nicate with the ECU.
If communication is successful the sys-
tem information will be displayed as
shown. Press the ENTER key.
Note: ECU Identification will be either
USA-2a, 2b, 3 or 4.
Select SPECIAL FUNCTIONS and press
the ENTER key.
ECU IDENTIFICATION
SPECIAL FUNCTIONS
DIAGNOSTIC MENU