Specifications

113
SPECIAL FUNCTIONS
PROGRAMMING PLIPS
8
ACCESS GAINED
SWITCH IGNITION OFF
IGNITION STATUS ON
SECURITY CODE
1 2 3 4
IS THIS CORRECT
OK = ENTER CLEAR =BACK
If code is correct press the ENTER key.
If code is entered incorrectly then press
the BACK key to reset the code.
If the code is correct, the AD100 will
display ACCESS GAINED.
Follow the screen instructions.
The AD100 should now indicate that the
key is programmed, and how many
there are.
Press the ENTER key and repeat the
sequence for up to 5 keys.
To check the programming status, use
the LIVE DATA function.
KEYS PROGRAMMED
KEYS PROGRAMMED : 1
PRESS ENTER KEY
> CLEAR PLIPS
PROGRAM PLIP
PRESS ENTER KEY