Specifications

112
SPECIAL FUNCTIONS
.CLEARING KEYS
PROGRAMMING KEYS
8
ERASING KEYS
KEYS ERASED
PRESS ENTER KEY
CLEAR KEYS
> PROGRAM KEYS
DIAGNOSTIC MENU
PRESS ENTER KEY
KEYS PROGRAMMED 0
If the code is correct, the AD100 will
display ACCESS GAINED.
It will then automatically erase all the
keys and display the message KEYS
ERASED if successful.
Using the UP and DOWN keys select
the PROGRAM KEYS option
If the clearing key function was
successful the AD100 should indicate
that there are no keys programmed.
Press the ENTER key.
Follow the screen instructions.
Enter the security code from the
Security Pass as outlined in the General
Operation section.
SWITCH IGNITION OFF
IGNITION STATUS ON
SECURITY CODE
_ _ _ _