Specifications

104
SPECIAL FUNCTIONS
CLEARING/PROGRAMMING
7
CLEAR PATS 3 KEY
GAINING ACCESS
TIME REQUIRED : 10:00
TIME ELAPSED : 0:00
ACCESS STATUS
IN PROGRESS
BACK TO ABORT
MIN KEYS REQUIRED : 2
TIMED ACCESS
CLEAR TIME 10:00
KEYS PROGRAMMED : 2
PRESS ENTER KEY
Programming keys :
When adding a key you only need 1 key
to cycle in the ignition after the 10 min-
ute wait. You must go through the clear
time wait.
Disregard that the screen displays that 2
keys are required.
There is a convenient in built timer to
keep you informed on the Access time
that is required on Ford vehicles to pro-
gram keys.
Follow on screen prompts.
Remove the key that is in the ignition af-
ter the clear time has expired and the
key is programmed.
Wait a few seconds and test the key.
To check and clear faults, select FAULT
CODES.
To check for faults, select READ FAULT
CODES.
If you clear fault codes successfully the
screen will show procedure complete.
PROGRAM KEYS
DISCONNECT TESTER
FROM VEHICLE
CYCLE KEYS
TO PROGRAM
ECU IDENTIFICATION
>FAULT CODES
SPECIAL FUNCTIONS
DIAGNOSTIC MENU
>READ FAULT CODES
CLEAR FAULT CODES
DIAGNOSTIC MENU