User's Manual

English - 12
SPECIFICA
SPECIFICA
TIONS
TIONS
English - 10
SELF DIAGNOSIS
If there is no image, the Self Diagnosis screen will be displayed.
Self Diagnosis function checks if the status of the monitor screen
is No Signal, Out of range or None support.
No Signal screen is displayed when the D-
Sub signal connector is connected but the
status of the monitor is on DPMS mode.
Out of Range screen is displayed when the
applied frequency is under or over normal
range.
Normal range
(Non-interlaced mode only)
H : 30 - 80 KHz
V : 56 - 77 Hz
Check cable screen is displayed when the
signal cable is disconnected.
Panel Size 19-inch diagonal
Pixel Pitch 0.294 x 0.294 mm
Viewing Angle 70°(Right/Left)
60°(up/down)
Contrast Ratio 700:1 contrast ratio(typ)
Brightness 300cd/m
2
brightness(typ)
Color Filter RGB vertical stripe
Synchronization Horizontal 30 - 80 KHz
Vertical 56 - 77 Hz
Video Bandwidth 140MHz
Max Resolution 1280 x 1024@75Hz
Optimal Resolution 1280 x 1024@60Hz
Colors 16M Colors
Display Area 376.3 mm x 301 mm
PC Input Signal Sync H/V separate(TTL)
Video 15 pin mini D-sub(Analog RGB)
DVI-D(Digital Visual Interface-Digital)
Audio I/O Stereo Mini Jack Input & Output
Speaker 2W(Left 1W + Right 1W)
Plug and Play VESA DDC Compatible
Power Source 100-240Vac, 50/60Hz(Free Voltage)
Power Consumption 35W
Dimension-W x H x D 386 x 398 x 190 mm(with stand)
386 x 346 x 60 mm(without stand)
Weight-net/gross 5.4/ 7.0 Kg (11.9/15.4 Lbs)
Power Saving EPA, VESA DPMS, Nutek Compliant
Tilt Range 5° forward, 30° backward
Operating Temperature 10 ~ 40°C /50 ~ 104°F
The specification can be changed without any prior notice to improve the quality of the
product.
The LCD panel may have some defective pixels (e.g. slightly light or dark) due to a
characteristic of the LCD panel. But there is no defect in your LCD product itself.
<L950>