Service manual

9
When the oven is first plugged in, the display will flash “ :0” and a tone will sound. If the AC power ever goes off, the display
will flash “ :0” when the power comes back on.
HOW TO SET THE OVEN CONTROL(KOR-971M0A)
SETTING THE CLOCKSETTING THE CLOCK
DO THIS...
1. Touch CLOCK/A.START pad.
2. Touch
CLOCK/A.START pad
once more.
3. Enter the correct time of day by
touching the numbers in
sequence.
4. Touch
CLOCK/A.START pad.
THIS HAPPENS...
This is a 12 hour clock system.
This is a 24 hour clock system.
The display will then begin blinking.
CLOCK /
A. START
0321
CLOCK /
A. START
CLOCK /
A. START
STAGE DEFROST
1 2 WEIGHT TIME
AUTO
START
LOCK NO CUPS g
STAGE DEFROST
1 2 WEIGHT TIME
AUTO
START
LOCK NO CUPS g
STAGE DEFROST
1 2 WEIGHT TIME
AUTO
START
LOCK NO CUPS g
NOTE :
This oven is multiple clock
system. If you want 12 hour clock
system, can be omitted this step.
The display stop blinking, and the colon starts blinking.
If you selected 12 hour clock system, this digital clock allows you to set from 1:00 to
12:59.
If you selected 24 hour clock system, this digital clock allows you to set from 0:00 to
23:59.
NOTE : If you attempt to enter an incorrect time, the time will not be set and a error signal tone will sound. Touch the
CLOCK/A.START pad re-enter the time.