DV-K284/K484DY-RG/F _GB-cover 01.1.
DV-K284/K484DY-RG/F _GB-cover 01.1.
DV-K284/K484DY-RG/F_GB-‡»¿º 01.1.30 1:31 PM ˘ ` b W O R T H Please keep the video machine's guarantee card and receipt safe for warranty purposes. k n o w i n g STAND BY REW STOP/ EJECT PLAY REC/ OTR CHANNEL FF Precautions ◆ ◆ ◆ STAND BY REW STOP/ EJECT FF PLAY REC/ OTR CHANNEL STAND BY REW STOP/ EJECT CHANNEL OP EJECT AUTO SET FF PLAY REC/ OTR CH.
DV-K284/K484DY-RG/F_GB-‡»¿º 01.1.30 1:31 PM ˘ ` 1 W O R T H Before doing anything with the machine, please read the chapter "Initial installation". k n o w i n g Contents Controls The remote control unit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 The machine, On screen display . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Initial installation Connecting up the video recorder, Fitting the remote control’s batteries . . .
DV-K284/K484DY-RG/F_GB-‡»¿º 01.1.30 1:31 PM ˘ ` 2 ◆ CONTROLS ◆ STAND BY REW STOP/ EJECT PLAY FF REC/ OTR CHANNEL The remote control is the principle means of control, but the main playback and record functions are also available on the front of the machine. Press any button (except ) to turn on the power. The remote control unit power off (standby) 2 3 5 6 8 9 0 / 1 4 7 max. 7 m.
DV-K284/K484DY-RG/F_GB-‡»¿º 01.1.30 1:31 PM ˘ ` 3 ◆ Press any button (except power.
DV-K284/K484DY-RG/F_GB-‡»¿º 01.1.30 1:31 PM ˘ ` 4 I n i t i a Place your video ◆ horizontally on a flat, steady base so that air can circulate around it for ventilation. ◆ away from humidity and heat, magnetic fields, such as those from loudspeakers etc., and with no heavy objects placed on top. l INSTALLATION STAND BY REW STOP/ EJECT PLAY REC/ OTR CHANNEL FF Connecting up the video recorder Switch off all components when connecting or disconnecting cables. ANT.
DV-K284/K484DY-RG/F_GB-‡»¿º 01.1.30 1:31 PM ˘ ` 5 ◆ ◆ You can also start "Auto Search" in the menu "PR Preset" "Auto Search". To tune in new stations (manual tuning) and to enter station names see page 14-16. I n i t i a l INSTALLATION Setting up the video recorder LANGUAGE SET English Français Deutsch Netherlands Italiano PYCCK Español PR OK PR+/-:select OK:confirm OK Choose your language.
DV-K284/K484DY-RG/F_GB-‡»¿º 01.1.30 1:31 PM ˘ ` 6 P L AY I N G ◆ ◆ c a s s e t t e s Playing back STAND BY REW STOP/ EJECT PLAY Your TV and your video recorder are switched on. To see the picture from your video, press the station button on the TV reserved for video input or the AV (Audio/Video) button. FF REC/ OTR CHANNEL STAND BY REW STOP/ EJECT AUTO SET CHANNEL 20 : 10 VCR S P 2 3 5 6 8 9 0 / 1 4 7 VCR S P TV/VCR VCR S P 00:00 PAL/SEC INDEX Stop playback.
DV-K284/K484DY-RG/F_GB-‡»¿º 01.1.30 1:31 PM ˘ ` 7 P L A Y I N G c a s s e t t e s Still Still picture from playback. Each press of the button advances the picture one frame. VCR S P PLAY switches back to normal playback. Variable picture search VCR S P VCR S P + - Starting from playback you can control search speed in 2 steps either forwards ( ) or backwards ( ). Press repeatedly. PLAY switches back to normal playback.
DV-K284/K484DY-RG/F_GB-‡»¿º 01.1.30 1:31 PM ˘ ` 8 ◆ ◆ RECORDING ◆ c a s s e t t e s STAND BY REW STOP/ EJECT AUTO SET CHANNEL 20 : 10 REC/ OTR PLAY FF The TV stations on the video have been tuned in (page 5). The video is switched on. You can either watch the picture from the video on the TV by pressing the station button reserved for video input or the AV button, watch another TV station or switch off the TV altogether.
DV-K284/K484DY-RG/F_GB-‡»¿º 01.1.30 1:31 PM ˘ ` 9 RECORDING c a s s e t t e s Setting time and date MENU CLOCK SET Time 16:05 PR Date 20/09/1997(SAT) 0 - 9 :setup(hour) / :correct OK :confirm MENU:end OK Call the video’s "MAIN MENU", choose "VCR Setup", then "Clock Set". PR OK CLOCK SET Time 16:05 1 4 7 OK 2 3 5 6 8 9 0 / MENU Date 20/09/1997(SAT) 0 - 9 :setup(minute) / :correct OK :confirm MENU:end Move to the position you want to change and type in the new values.
DV-K284/K484DY-RG/F_GB-‡»¿º 01.1.30 1:32 PM ˘ ` 10 M O R ◆ E ◆ f u n c t i o n s STAND BY REW STOP/ EJECT REC/ OTR CHANNEL AUTO SET 20 : 10 PLAY FF For timer recordings, clock, date, and stations must be set correctly. Load a cassette with its safety tab in place (see page 13) and with sufficient free space for the recording.
DV-K284/K484DY-RG/F_GB-‡»¿º 01.1.
DV-K284/K484DY-RG/F_GB-‡»¿º 01.1.30 1:32 PM ˘ ` 12 ◆ M O R E ◆ f u n c t i o n s STAND BY REW STOP/ EJECT REC/ OTR CHANNEL PLAY FF The counter counts in real time from the point you load the cassette. This does not have to be its beginning! The counter does not count unrecorded parts of the tape. If you rewind beyond the zero position, the counter counts in negative values (e.g. – 0:01:15).
DV-K284/K484DY-RG/F_GB-‡»¿º 01.1.30 1:32 PM ˘ ` 13 M O R E f u n c t i o n s Menu languages MENU LANGUAGE SET English Français Deutsch Netherlands Italiano PYCCK Español PR OK PR+/-:select OK:confirm PR MENU:end Call the video’s "MAIN MENU", choose "VCR Setup", then "Language Set". Select your language. Confirm. Child lock Press the button for about 5 seconds. Your video can´t be operated now, only timer recordings will be performed. Keep your remote control in a safe place.
DV-K284/K484DY-RG/F_GB-‡»¿º 01.1.30 1:32 PM ˘ ` 14 ◆ i n ◆ NEW STATIONS ◆ T u n i n g STAND BY REW STOP/ EJECT REC/ OTR CHANNEL PLAY FF The TV and video recorder are switched on. To see the picture from your video, press the station button on the TV reserved for video input or the AV (Audio / Video) button. "AV" should not be selected with the AV button.
DV-K284/K484DY-RG/F_GB-‡»¿º 01.1.30 1:32 PM ˘ ` 15 T u n i n g i n NEW STATIONS Station names If your video is showing no station name or is showing a station name incorrectly, you can correct this. Select the station. MANUAL SET PR10 Station Name ---PR+/-:search up/down :station correct :PR view OK:confirm MENU:end Call this menu (just see the left page), if it isn't displayed. MANUAL SET PR10 Station Name EURO PR Select "station correct". Either select the name from the stored list ...
DV-K284/K484DY-RG/F_GB-‡»¿º 01.1.30 1:32 PM ˘ ` 16 T u n i n g i n NEW STATIONS STAND BY REW STOP/ EJECT REC/ OTR CHANNEL PLAY FF Sorting programme locations If the location numbers used for programmes stored in your TV and video are different, you can change them on the video. To do this, move the stations to the right numbers, until they are arranged the way you want. MENU PR OK 2x Call the video’s "MAIN MENU", choose "VCR Setup", then "PR Preset" then "PR Align".
DV-K284/K484DY-RG/F_GB-‡»¿º 01.1.30 1:32 PM ˘ ` 17 ◆ ◆ If you are using an A/V cable, select the AV input on the TV to see the picture from the video. If you are not using an A/V cable, select the button number on the TV reserved for video input to see the picture from the video. CONNECTIONS and copying To the TV via antenna cable (if you are not using an A/V cable) If you are not using an A/V cable, your video can transmit pictures and sound to the TV via the coax aerial cable.
DV-K284/K484DY-RG/F_GB-‡»¿º 01.1.30 1:32 PM ˘ ` 18 CONNECTIONS a n d c o p y i n g ◆ STAND BY REW STOP/ EJECT REC/ OTR CHANNEL PLAY FF Switch off all components when connecting or disconnecting cables. Copying AV TR TV (other VCR) 2 3 5 6 8 9 0 / 1 4 TV/VCR AV ANT. IN 7 T.R AUDIO VIDEO OUT / 00:00 IN EJECT SP/LP PAL/SEC INDEX PR ANT.
DV-K284/K484DY-RG/F_GB-‡»¿º 01.1.30 1:32 PM ˘ ` 19 BRIEF INSTRUCTION for experienced Playing back ◆ ◆ Your TV and your video recorder are switched on. To see the picture from your video, press the station button on the TV reserved for video input or the AV (Audio/Video) button. Start playback. Simple recording ◆ ◆ ◆ The TV stations on the video have been tuned in (page 5). The video is switched on.
DV-K284/K484DY-RG/F_GB-‡»¿º 01.1.30 1:32 PM ˘ ` 20 BRIEF INSTRUCTION for experienced users Normal timer ◆ ◆ For timer recordings, clock, date, and stations must be set correctly. Load a cassette with its safety tab in place (page 13) and with sufficient free space for the recording.
DV-K284/K484DY-RG/F_GB-‡»¿º 01.1.30 1:32 PM ˘ ` 21 APPENDIX Before you ask a specialist Mains supply the video's display does not light the video doesn’t work - The mains lead is not connected to the wall socket. - condensation may have formed when moving the video recorder from a cold to an warm room. Wait until the video (and cassette!) reach room temperature. Recording doesn’t start - Is a cassette loaded? the cassette starts playback or is ejected - the safety tab may be missing.
DV-K284/K484DY-RG/F_GB-‡»¿º 01.1.30 1:32 PM ˘ ` 22 APPENDIX Index Aerial . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Assembling recordings . . . . . . . . . . . . . . 18 AV . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4/18 Cassette length . . . . . . . . . . . . . . . . . . . . 12 Channel . . . . . . . . . . . . . . . . . . . . . . . . . . 17 Child lock . . . . . . . . . . . . . . . . . . . . . . . . 13 Condensation . . . . . . . . . . . . . . Precautions Cleaning . . . . . . . . .