NEXT Type No.
U.S.A. U.S.FEDERAL COMMUNICATIONS COMMISSION RADIO FREQUENCY INTERFERENCE STATEMENT INFORMATION TO THE USER NOTE : This equipment has been tested and found to comply with the limits for a Class B digital device pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
F227B 17" TFT LCD Color Monitor Contents 1. Introduction ...................................1/22 2. Safety Information ........................1/22 3. Installing the monitor ...................4/22 3-1. Packing List .........................................4/22 3-2. Instructions to Install the Stand ........5/22 3-3. Selecting a suitable location ..............6/22 3-4. Connecting the monitor .....................6/22 3-5. Setting the refresh rate ......................9/22 Preset Timing Table .............
F227B 17" TFT LCD Color Monitor 1. Introduction This manual contains instructions for installing and operating Daewoo Computer F227B. Daewoo Computer F227B is a highly ergonomic color display unit. • • • • • • • • • 2.
F227B 17" TFT LCD Color Monitor Avoid operating the monitor in extreme heat, humidity or areas affected by dust. Temperature : 5~35°C Humidity : 30~80RH Be sure to turn the monitor off before plugging the power cord into the socket. Make sure that the power cord and the other cords are securely and rightly connected. Overloaded AC outlets and extension cords are dangerous, as are frayed power cords and broken plugs, which may cause electric shock or fire. Call your service technician for replacement.
F227B 17" TFT LCD Color Monitor Cleaning and Maintenance • • • • • To avoid risk of electric shock, do not disassemble the display unit cabinet. The unit is not user-serviceable. Remember to unplug the display unit from the power outlet before cleaning. Do not use alcohol (methyl, ethyl or isopropyl) or any strong dissolvent. Do not use thinner or benzene, abrasive cleaners or compressed air. Do not wipe the screen with a cloth or sponge that could scratch the surface.
F227B 17" TFT LCD Color Monitor 3. Installing the monitor The following items should be found in the packaging. 3-1. Packing List Power Cord UK Japan Signal Cable America/Canada Europe Audio Cable (Option) South Africa Australia Compact Disc Korea Main Unit Body Stand Base ! Above power cord can be changed upon different voltage areas. Please contact your dealer if anything is missing or damaged.
BACK F227B 17" TFT LCD Color Monitor NEXT 3-2. Instructions to Install the Stand Install the stand according to the following instructions on a flat surface. 1. 2. 3. Place the main unit body with screen face down and flip open the folded Stand Post at 120 degree angle. Engage the Base to the Stand Post by pressing down gently in right position (If installed correctly you will hear a click sound). Pull the installed base open to bring the main body unit to stand.
F227B 17" TFT LCD Color Monitor 3-3. Selecting a suitable location • • • • • 3-4. Connecting the monitor ! 1. 2. 3. 4. Place the monitor at least 30cm from other electrical or heat-emitting equipment and allow at least 10cm on each side for ventilation. Place the monitor in a position where no light shines directly onto or is reflected on the screen. To reduce eye strain, avoid installing the display unit against a bright background such as a window.
F227B 17" TFT LCD Color Monitor 5. Turn on the power to the computer. The picture will appear within about 10 seconds. Adjust the picture to obtain optimum picture quality. See section Adjusting the picture in this guide for more information.
F227B 17" TFT LCD Color Monitor • Audio system This monitor has an audio system including two micro loudspeakers. Each of two micro loudspeakers has an 2Wrms (max.) output power. This system also supports a headphone output jack. ! When this monitor is turned on, audio is always set up as off mode. Please use AUDIO direct access button on the front cover or On Screen Display to put audio on.
F227B 17" TFT LCD Color Monitor Power Switch / LED Indecator 3-5. Setting the refresh rate Follow the instructions below to set your refresh rate in Windows 98/ME/XP/2000. 1. 2. 3. 4. 5. 6. Go to the configuration window(Start-Settings-Configuration window). Double click on the ‘Display’ icon. Click on the ‘Settings’ tab. Click on the ‘Advanced’ button. Click on ‘Adapter’ and select 60Hz from the list. Click on ‘Apply’ to accept the selected value.
F227B 17" TFT LCD Color Monitor Preset Timing Table ! If the signal from the system doesn't equal to the preset timing mode, adjust the mode with reference to the user guide of videocard because the screen may not be displayed. The recommended setting is a resolution of 1280x1024 and a refresh rate of 60Hz. No. Resolution Horizontal Frequency Refresh rate 1 2 3 4 5 6 7 8 9 10 720 x 400 640 x 480 640 x 480 800 x 600 800 x 600 1024 x 768 1024 x 768 1024 x 768 1280 x 1024 1280 x 1024 31.5 KHz 31.
F227B 17" TFT LCD Color Monitor 3-6. User’s Environment Recommended Ergonomic User’s Environment • Viewing angle of the monitor should be between 0~20 degree. 20o Kensington security slot Kensington Security (Locking) Slot • • This display unit supports a Kensington-type security device to secure your monitor. Kensington lock is not included. To purchase and install the Kensington locking device, please refer to the following contact information.
F227B 17" TFT LCD Color Monitor VESA MOUNT’G • • ! This display unit supports VESA FPMPMI standard for 75mm x 75mm screw mounting by giving 4 screw holes inside the base stand of the unit. For buying VESA Flat Panel Monitor Mounting Devices, please contact following information. Only M4 x12 size screw should be used for proper mounting. (Using wrong size screw may cause damages to the device) * Ergotron, Inc.
F227B 17" TFT LCD Color Monitor 4. Adjusting the picture You can adjust the screen display by using the buttons located below the screen. 1280x1024 H:63.9 V:60.
F227B 17" TFT LCD Color Monitor 4-1. Using the On Screen Display 1. 2. 3. 4. 5. 6. Push the MENU button to call the OSD to the screen. The resolution and frequency are displayed at the top of the menu box for your information. Push the or button to choose the item you want to adjust. The selected item is highlighted. Push the SELECT button to adjust the highlighted item. Use the or button to adjust the selection. Push the MENU button to return to the previous menu if you are in a submenu.
F227B 17" TFT LCD Color Monitor 4-3. OSD Adjustments The OSD adjustments available to you are listed below. BRIGHTNESS Adjust the brightness of the screen. CONTRAST Adjust the contrast of the screen. COLOR CONTROL Color temperature affects the tint of the image. With lower color temperatures the image turns reddish and with higher temperatures bluish. There are three color settings available: Mode 1(9300K), Mode 2(6500K) or USER.
F227B 17" TFT LCD Color Monitor CLOCK PHASE PHASE Adjust the noise of the screen image. CLOCK Adjust the horizontal size of the entire screen image. MISCELLANEOUS RECALL Recall the saved color data. OSD TIMER You can set the displayed time of OSD Menu window on the screen by using this adjustment. OSD POSITION Adjust the OSD menu's horizontal or vertical position on the screen. AUTO COLOR Optimum color setting is auto programmed for user’s convenience.
F227B 17" TFT LCD Color Monitor AUDIO VOLUME Adjust the audio volume level. AUDIO This menu is used to choose audio on or off. AUTO ADJUST You can adjust the shape of screen automatically at the full screen pattern.
F227B 17" TFT LCD Color Monitor 5. Display power management Reducing power consumption If the power management function of your computer is enabled, your monitor turns on and off automatically. You can control power management features from your computer. Your computer may have power management features which enable the computer or monitor to enter a power saving mode when the system is idle. You can reactivate the system by pressing any key or moving the mouse.
F227B 17" TFT LCD Color Monitor 6. Troubleshooting If your monitor is not functioning properly, you may be able to solve the problem by following the suggestions below : Problem Blank screen Possible solution If the power LED is not lit, push the Soft power switch or check the AC cord to turn the monitor on. If the display unit is powered through the computer, check that the computer is switched on. The display unit might be in standby mode. Push one of the keyboard keys.
F227B 17" TFT LCD Color Monitor Problem Possible solution Color defects Check that the signal cable connector is properly connected and that the connection pins are not bent or damaged. Try another color temperature. Size, position, shape or quality unsatisfactory Adjust the picture characteristics as described in the section OSD Adjustment(4-3). Duplicated images A problem with your graphics adapter or display unit. Contact your service representative.
F227B 17" TFT LCD Color Monitor Problem The power LED is a orange color Possible solution LED Indicator can be orange color on changing of video mode or Input Signal. Check the Resolution and the frequency on the video part of your computer. Compare these values with the data in the Preset Timing Table. Contacting service If the above troubleshooting hints do not help you find a solution to the problem, contact an authorized service agent.
F227B 17" TFT LCD Color Monitor 7. Specifications LCD Brightness Response Time Display area Input signals Frequency rate Maximum bandwidth Maximum resolution Recommanded resolution Input voltage Power consumption Power management Plug & Play OSD menu Audio system VESA FPMPMI Ergonomics, Safety and EMC Operating Temperature Weight Dimensions (W X H X D mm) 17"viewable, Diagonal, Pixel pitch 0.264 mm, A-Si TFT 250cd/m2 16msec (Typ.) 337.92 x 270.336 mm R.G.B Analog, 15 pin D-sub Horizontal : 31.0 to 80.
