User Manual DSC-30W60N
HDTV H DT V Important safety instructions • Read all safety and operating instructions before operating the TV receiver. • Retain the safety and operating instructions for future reference. CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. This symbol indicates high voltage is present inside. It is dangerous to make any kind of contact with any internal part of this product.
HDTV H DT V • Unplug the TV receiver from the wall outlet and disconnect the antenna or cable system during a lightning storm or when left unattended and unused for long periods of time.This will prevent damage to the unit due to lightning and power-line surges. • Avoid overhead power lines.An outside antenna system should not be placed in the vicinity of overhead power lines or other electric light or power circuits or where it can fall into such power lines or circuits.
Contents Introducing your new HDTV. . . . . . . . . . . . . . . . 1 Top panel controls and front panel lights . . . . .1 Side panel inputs . . . . . . . . . . . . . . . . . . . . . . . .2 Rear panel inputs and outputs . . . . . . . . . . . . . .3 Remote control overview . . . . . . . . . . . . . . . . . .4 Installing the batteries in the remote control . .6 Programming the remote control . . . . . . . . . . .6 Operating the remote control . . . . . . . . . . . . . .6 Connecting your HDTV . . . . . . . . . .
Introducing your new HDTV This chapter will explain the various controls and inputs and outputs you will find on your Daewoo HDTV. Top panel controls and front panel lights 2 1 1 2 SELECT MENU 3 4 5 6 On the top of the HDTV, you will find the following controls: 1. VOL (Volume) buttons Use these buttons to change your HDTV's volume or to move the cursor in the menu screens. 2. CH (Channel) buttons Use these buttons to change channels on your HDTV or to move the cursor in the menu screens. 3.
HDTV H DT V TIMER POWER 1 2 3 On the front panel of the HDTV, you will find: 1. Timer Indicator Lights up red when you have set the HDTV's automatic timers. 2. Power Indicator Lights up green when you have turned the HDTV on. 3. Remote Control Signal Sensor Receives signals from the remote control. Side panel inputs VIDEO L AUDIO R S-VIDEO 2 On the right side panel of the HDTV you will find the Video 4 inputs.
HDTV H DT V Rear panel inputs and outputs 2 SIGNAL SELECT DIGITAL AUDIO VIDEO 1 HD COMPONENT OUTPUT Hs OPTICAL /PCM 1 COAXIAL /PCM COAXIAL /PCM 4 G Y Vs B PB L (mono) R PR R V OPTICAL /PCM 3 HD COMPONENT VIDEO INPUT (1080 i/480P) 8 IN S-VIDEO SPEAKER OUTPUT RS 8‰/5W INPUT L CENTER R WOOFER RS LS WOOFER 8‰/8W LS 8‰/5W 9 CABLE HD COMPONENT AUDIO INPUT VIDEO 1 V VHF UHF 7 OUT L (mono) DO NOT OPEN DTV IN R (FOR SERVICE ONLY) VIDEO 2 VIDEO 3 5 6 1.
HDTV H DT V Remote control overview The remote control has the following functions: 1. POWER button 1 27 Press to turn the HDTV (and other equipment) on and off. 26 2 3 25 4 5 24 6 2. MODE buttons Press to select which equipment you wish your remote control to operate: • SAT (satellite) • CATV (cable box) • VCR • TV The Mode button you press will light up in red. 3. MENU button 23 7 Press once to display the HDTV menus. Press again to make the menus disappear. 4.
HDTV H DT V 11. SOUND button Press to select a sound option: Mono, Stereo, or Secondary Audio Programming (SAP).When you tune to a digital channel, press to select various languages. 12. SLEEP TIMER button Press to select the time before the HDTV turns off: 30 minutes, 60 minutes, 90 minutes, or 120 minutes. 13. CLOSED CAPTION button Press to turn closed captions on and off. 14. FF (Fast Forward) button Press to fast forward a videocassette. 15. PLAY button Press to play a videocassette. 16.
HDTV H DT V Installing the batteries in the remote control 1. Remove the battery compartment lid from the back of the remote control by pressing on the lid and sliding it off. 2. Insert two AAA batteries into the compartment. Match the + and — on the batteries to the + and — in the compartment. 3. Replace the battery cover. Programming the remote control The HDTV remote control is pre-programmed to operate your Daewoo HDTV.
Connecting your HDTV CAUTION - Make sure your HDTV is unplugged before connecting equipment. This chapter explains how to connect all of your equipment to the HDTV. Before you begin, Daewoo suggests you make sure you have all of the cables and wires you will need.These may include: • • • • • • Speaker wire Coaxial cable (for VCRs, DVDs, etc.
HDTV H DT V Indoor/outdoor antenna and cable TV If you have a cable box, plug the cable from the wall into the IN terminal of the cable box. Connect a coaxial cable between the OUT terminal of the cable box and the antenna input on the HDTV labeled IN. If you wish to connect a VCR with your cable box, please see “VCR With a Cable Box” on page 9. ❑ NOTE: It is necessary to connect an indoor/outdoor antenna to receive digital broadcasts.
HDTV H DT V VCR with a cable box To connect a VCR with a cable box, follow the diagram below. If you are connecting a mono VCR, connect only L/MONO. Digital Satellite System (DSS) or Laser Disc (LD) To connect a Digital Satellite System or Laser Disc, follow the diagram below.
HDTV H DT V HD component and audio system To connect a HD component and audio system, follow the diagram below. ❑ NOTE: After you connect a digital audio system, you will need to use the menus to set it up. Please see “Setting up Digital Audio” on page 22. DVD (480i) To connect a digital video disc (DVD), follow the diagram below.
HDTV H DT V Camcorder The Video 4 inputs on the side of the HDTV make it easy to connect a camcorder.To do this, follow the diagram below. Side of HDTV VIDEO L AUDIO R S-VIDEO Video L R Audio Video L R Audio OR Out S-VIDEO In Camcorder Speakers To connect standard speakers, follow the diagram below.
Setting up your HDTV This chapter explains the basic setup required for watching and listening to your HDTV for the first time. Daewoo has made setup as easy as possible with the use of on-screen menus and simple navigation controls. Using the on-screen menu system Daewoo has designed an easy-to-use menu system for controlling your television.Along with your remote control, the menus make all of your HDTV's controls and features a few button presses away. To use the menus: 1.
HDTV H DT V Setting the time and date 1. Press the MENU button to display the MAIN MENU. MAIN MENU 2. Press the up/down arrow buttons to highlight SETUP. GUIDE PREFERENCE LOCKS & LIMITS SETUP VIDEO AUDIO Input Select Channel Setup Time Setting Digital Audio Speaker Setup Factory Setting HD Comp. HELP SEL Select Move 3. Press the SEL button. The SETUP menu is displayed. • Input Select • Channel Setup SETUP • Time Setting • Digital Audio Select one of the setup options.
HDTV H DT V 6. Use the Number (0-9) buttons on the remote control to enter the time. For example, to enter 12:45 press 1, 2, 4, and 5. 7. Use the up/down arrow buttons to select A (AM) or P (PM) then press the right arrow button to move to the Date field. 8. Use the Number buttons to enter the Date and Year and then Time: 1 2 : 4 5 P TIME SETTING Date: 0 1 / 0 1 Set the time, date, year using the Number button. Year 2 0 0 0 After completing press the SEL button.
HDTV H DT V 3. Press the PREV button to return to the SETUP menu. 4. Use the up/down arrow buttons to highlight Channel Setup and then press the SEL button. The CHANNEL SETUP menu is displayed. • Check Signal Strength • Channel Scanning CHANNEL SETUP • Add/Erase Channel • Fine Tuning Select one of the channel options. SEL Move Select 5. Use the up/down arrow buttons to highlight Channel Scanning and then press the SEL button. The CHANNEL SCANNING menu is displayed.
HDTV H DT V Adding/erasing channels You can easily add or erase channels that your HDTV memorized. To do this: 1. From the MAIN MENU highlight SETUP and press the SEL button. 2. Highlight Channel Setup and press the SEL button. • Input Select • Channel Setup SETUP • Time Setting • Digital Audio Select one of the setup options. • Speaker Setup • Factory Setting • HD Component Input SEL Move Select 3. Highlight Add/Erase Channel. Press the SEL button. 4.
HDTV H DT V Fine tuning channels You can fine tune channels that do not appear as clearly as they should. ❑ NOTE: You cannot fine tune a digital channel. Digital channels either appear perfectly tuned or they do not appear at all. To fine tune a channel: 1. From the CHANNEL SETUP menu use the up/down arrow buttons to highlight Fine Tuning. Press the SEL button.You will see the FINE TUNING menu. 2.
HDTV H DT V Selecting channels Daewoo has provided a number of different ways to conveniently select channels.They include: • • • • Using the Channel buttons Using the Number buttons Using the channel selector Selecting favorite channels ❑ NOTE: To change digital channels from the Program Guide, please see “Using the Program Guide” on page 25. Using the Channel buttons To change channels, press the up/down CH buttons on the remote control or top panel of the HDTV.
HDTV H DT V Selecting favorite channels Your HDTV can store up to 16 channels that you can quickly select by using the arrow buttons on the remote controls.To store and select your favorite channels: 1. From the MAIN MENU, use the up/down arrow buttons to highlight PREFERENCE. Press the SEL button to see the PREFERENCE menu. • Favorite Channels PREFERENCE • OSD Screen Color • Closed Caption • On/Off Timer Select one of the preference options. SEL Move Select 2.
HDTV H DT V Selecting a source You can choose to view any of the input sources that you have connected to your HDTV. To do this: Press the TV/VIDEO button on the HDTV or on the remote control. VIDEO 1 Each time you press either button, the HDTV will display one of the sources that are available.These include: • TV mode • HD comp (HD Component Video) • Video 1 • Video 2 • Video 3 • Video 4 These sources correspond to the inputs on the side and back panel of the HDTV.
HDTV H DT V 3. Press the up/down arrow buttons to highlight Speaker Off and press the SEL button. The SPEAKER OFF menu is displayed. 4. If you: do not want to use external (left/right/center) speakers, highlight No and press the SEL button. • do want to use external speakers, highlight Yes and press the SEL button. 5. Press the PREV button to return to the SPEAKER SETUP menu. • Yes SPEAKER OFF • No If you want to use the external L/R/C speakers, select 'Yes'.
HDTV H DT V Setting up digital audio You can set the HDTV to automatically adjust to play the kind of digital audio that you connected. To do this: 1. From the MAIN MENU, use the up/down arrow buttons to highlight SETUP. Press the SEL button. 2. From the SETUP menu, use the up/down arrow buttons to highlight Digital Audio. Press the SEL button.
HDTV H DT V • Dolby Surround (L, R, C, Ls, Rs) Select if you have connected external rear surround speakers and wish to listen to full Dolby Surround Sound. • 3 Stereo (L, R, C) Select to hear sound from a left, right and center speaker system. • Phantom Center (L, R, Ls, Rs) Select to hear surround sound without center channel audio.The center channel speaker will be simulated. • Stereo (L, R) Select to hear regular stereo.
HDTV H DT V • Woofer Volume Use the left/right arrow buttons to adjust the volume of a subwoofer.The range of this control is between 0 and +63. • Center Delay Use the left/right arrow buttons to adjust the delay time for sound that comes from the center speaker.The range of this control is 0 to 5. • Surround Delay Use the left/right arrow buttons to adjust the delay time for sound between the front and rear speakers.The range of this control is 0 to 15.
25
HDTV H DT V Selecting a current program To watch a program that is listed in the program guide, use the arrow buttons to highlight the program you want to watch on the guide and then press the SEL button.The selected program appears on the screen. Seeing the channel banner The Channel Banner allows you to view information about the current program. To view the Channel Banner: Press the INFO button on the remote control.
HDTV H DT V To remove the Channel Banner: Press the INFO button again or wait for the banner to disappear. Selecting major and minor channels You can select major channels using the up/down CH or Number buttons.The major channel number will be displayed on top-left of the channel banner (e.g., 11, 20, 45, etc.). If a major channel has minor channels, minor channels are displayed on the bottom of the channel banner (eg., 20-1, 20-2, 20-3, etc.).
28
HDTV H DT V Using the midnight mode Daewoo offers a special feature that lets you listen to your HDTV at night without abrupt changes in volume. For example, when a TV station cuts from a movie to a commercial, the audio may suddenly become much louder than the program you were watching. The Midnight Mode changes all of that by ensuring the volume always remains the same, regardless of the programming. To use the Midnight Mode: 1. From the MAIN MENU, use the up/down arrow buttons to highlight AUDIO.
Using Video Features Your Daewoo HDTV provides a variety of standard and special video controls and settings. Using the video controls 1. From the MAIN MENU, use the up/down arrow buttons to highlight VIDEO. Press the SEL button. 2. From the VIDEO menu, use the up/down arrow buttons to highlight Video Control. Press the SEL button. 3. Use the left/right arrow buttons to highlight and change the brightness, contrast, color tint, and sharpness. 4.
HDTV H DT V To change the Video Mode from the menus: 1. From the MAIN MENU, use the up/down arrow buttons to highlight VIDEO. Press the SEL button. 2. From the VIDEO menu, use the up/down arrow buttons to highlight Video Mode. Press the SEL button. 3. Use the up/down arrow buttons to highlight Normal, Dynamic, Cinema, or Customer. Press the SEL button to select a setting. • Normal VIDEO MODE Select one of the preset picture settings. • Dynamic • Cinema • Customer 4.
HDTV H DT V To change the Screen Mode from the menus: 1. From the MAIN MENU, use the up/down arrow buttons to highlight VIDEO. Press the SEL button. 2. From the VIDEO menu, use the up/down arrow buttons to highlight Screen Mode. Press the SEL button. 3. Use the up/down arrow buttons to highlight Normal, Full or Zoom. Press the SEL button to select a setting. 4. When finished, press PREV to return to the VIDEO menu or MENU to exit the menus. To change the Screen Mode from the remote control: 1.
HDTV H DT V To turn Closed Captions on and off from the remote control: 1. Press the button on the remote control labeled CLOSED CAPTION. 2. Each time you press the button you will see an on screen display which says "CC ON" or "CC OFF.
Setting Locks and Limits Your HDTV can set locks and limit the kinds of programs that your family can watch.You can do this by choosing a password and a settings a ratings limit. Changing the password 1. Press MENU and highlight LOCKS & LIMITS. Press the SEL button. You will see a screen that asks you to enter a password. Using the Number buttons or the arrow buttons, enter your password. (The factory’s preset password is 1,2,3,4.) You will see the LOCKS & LIMITS menu.
HDTV H DT V 2. You will see the RATING LIMIT screen. Use the arrow buttons to select a Motion Picture Association of America (MPAA) rating and a TV rating that conforms to the Federal Communication Commission (FCC) TV Parental Guidelines. An explanation of the ratings follows: MPAA Rating RATING LIMIT Select the new Rating Limit for viewers. MPAA ratings G PG PG-13 R NC-17 X Recommended for all (general) audiences Parental Guidance suggested. Children under 13 should be accompanied by an adult.
Using Timers Daewoo provides two different timers for you to use.The On/Off timer turns the HDTV on and off just once on the day you set it, or on and off at the same time everyday. The sleep timer lets you set the TV to automatically turn off after 30, 60, 90, or 120 minutes. Using the sleep timer You can use the Sleep Timer from the remote control. To set the Sleep Timer: 1. Press the button on the remote control labeled SLEEP TIMER. 2.
HDTV H DT V To set the timer for everyday: 1. From ON/OFF TIMER menu, highlight Everyday (MondaySunday). 2. Press the SEL button. 3. Set the hour, minute, and AM/PM that you wish the HDTV to turn on and off. ❑ NOTE: Use the Number buttons or the up/down arrow buttons to change the value of an item. Use the left/right arrow buttons to select an item (such as hour, minute, etc.
Using the Menus without the Remote Control You can use the menus from the top panel controls of the HDTV, much like you use them from the remote control.The top panel controls operate slightly differently. The differences are: • • • • The top panel controls have no PREV button.Therefore you cannot back up from one menu to the previous menu. Use the up/down CH buttons like the up/down arrow buttons on the remote control. Use the left/right VOL buttons like the left/right arrow buttons on the remote control.
39
Programming Setting the Remote up yourControl HDTV The HDTV remote control is pre-programmed to operate your HDTV. However, you can also program the HDTV remote control to operate other components, such as a Cable TV Box, a DSS, a VCR. 1. Confirm that the external component is plugged in and is turned off. 2. Find your component’s list of code numbers from the manufacturers Code List. (Refer to Component Codes) Mode buttons 3.
HDTV H DT V Component codes Cable TV Box Brand Code ABC ANTRONIX ARCHER CABLE STAR CENTURION CENTURY CITIZEN COLOUR VOICE COMBANO COMTRONICS DIAMOND EAGLE EASTERN ELECTRICORD G.
HDTV H DT V VCR Brand Code ADMIRAL AIWA AKAI AMPRO ANAM AUDIO DYNAMICS BROKSONIC CALIFORNIA AUDIO CANON CAPEHART CRAIG CURTIS MATHES DAEWOO DAYTRON DBX DENON DIMENSIA DYNATECH ELECTROHOME EMERSON FISHER FUNAI GE GO VIDEO GOLDSTAR HARMAN KARDON HITACHI INSTANTREPLAY JCL 164 033 017 040 042 100 101 115 158 068 030 032 081 013 023 037 040 166 034 036 102 123 027 030 032 086 005 038 108 030 032 155 159 001 007 009 012 060 061 086 088 090 094 095 096 086 013 023 037 040 166 124 141 144 159 033 049 055 008
HDTV H DT V Digital Satellite Receiver Brand Code STS SYLVANIA SYMPHONIC TANDY TATUNG TEAC TECHNICS TEKNIKA THOMAS THOMSON TMK TOSHIBA TOTEVISION UNITECH VECTOR RESEARCH VICTOR VIDEO CONCEPTS VIDEOSONIC WARDS YAMAHA ZENITH 014 030 032 033 055 063 033 012 033 037 040 166 033 037 040 166 030 032 148 019 030 032 033 079 033 125 126 008 010 014 039 043 055 077 090 104 038 079 038 013 044 013 033 042 157 038 005 014 018 024 030 032 033 038 049 050 104 164 165 013 033 037 040 138 139 152 166 033 044 052 054 06
Troubleshooting Sometimes problems can be easily solved by checking a few basic things. Check below before you call for help or take your HDTV to an Authorized Service Center. Symptom Remedies No power Check that the AC power plug is securely plugged into the power outlet. Cannot select a specific channel with CH up/down buttons • • Check the channel station by pressing the CHANNEL STATION button. The channel may not be in memory.
45
Limited Warranty Daewoo Electronics Corporation of America Inc. (also known as DECA) warrants this product to be free from defects in material and workmanship and agrees to remedy any such defect. This warranty covers 1 year labor and 1 year parts from the date of original purchase. This warranty applies only to product purchased from authorized DECA dealer and used within the boundaries of U.S.A.
Visit us on the web at: http://www.daewoo-digital.
