User's Manual

ManualsBrandsDaewoo Electronics ManualsCRT TVDaewoo Electronics DSC-3270E

MODEL NO. : DSC-3270E

Colour Television

Instruction Manual

Manufactured under license from Dolby Laboratories.

"Dolby" and the double-D symbol are trademarks of Dolby Laboratories.

Summary of content (16 pages)

PAGE 1
Colour Television Instruction Manual MODEL NO. : DSC-3270E Manufactured under license from Dolby Laboratories. "Dolby" and the double-D symbol are trademarks of Dolby Laboratories.
PAGE 2
PAGE 3
IDENTITY OF FEATURES ON LOCAL AND REMOTE CONTROL DSC-3270E TV SET FRONT PROGRAM DOWN/UP BUTTON VOLUME DOWN/UP BUTTON TV/AV (MENU) TIMER STAND-BY INDICATOR INDICATOR REMOTE SENSOR SIDE VIDEO INPUT AUDIO INPUT S-VHS INPUT 1 HEADPHONE MAIN POWER BUTTON
PAGE 4
IDENTITY OF FEATURES ON LOCAL AND REMOTE CONTROL REAR EXTERNAL SURROUND SPEAKER TERMINAL AV3 R + _ L + _ AV2 ANT SCART SOCKET 1,2,3 AV1 AERIAL TERMINAL REMOTE CONTROL TV . . . . . . . . . . . . . . TXT TV . . . . . . . . . . . . . . TXT VOLUME . . . . . . . . . . . . . VOLUME DOWN . . . . . . . . . . . . . . . . . DOWN (CURSOR LEFT) PR UP . . . . . . . . . . . . . . . PAGE UP (CURSOR UP) VOLUME UP . . . . . . . VOLUME UP (CURSOR RIGHT) PR DOWN . . . . . . . . . PAGE DOWN (CURSOR DOWN) MENU . .
PAGE 5
CONTENTS L IDENTITY OF FEATURES ON LOCAL AND REMOTE CONTROL . . . . . . . . . . . . . . . . . . . . . . . . 1 L IMPORTANT SAFEGUARDS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 L INSTALLATION -Inserting Batteries into the Remote Control Unit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 -Aerial connection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
PAGE 6
INSTALLATION If the set is moved or placed in a different direction, the MAIN POWER button must be switched off for at least 15 minutes in order to take out a colour strain on the screen. INSERTING BATTERIES INTO THE REMOTE CONTROL UNIT Press down the battery compartment grip and slide the cover. Insert the batteries supplied (two 1.5V, type AAA). Make sure that the polarity matches with the (+) and (-) marks inside of the battery compartment.
PAGE 7
SWITCHING THE SET ON AND OFF Switching On • Switch the set on with the MAIN POWER (ON/OFF) button. The INDICATOR will illuminate in Red. That means the set is on stand-by mode. • Press PR UP or DOWN button on the front of set or POWER button( ) or PR UP/DOWN button or one of the NUMBER button (0..9) on the remote controller. The set will be switched on and then the INDICATOR will be changed in Green from Red.
PAGE 8
• Press the RIGHT button. Auto setup will begin, your stations will be located and stored. • Please wait until the Edit menu appears. If you don’t want to edit programme now, escape from menu with the MENU button. You can do it later.
PAGE 9
MANUAL CHANNEL SETTING • Press the NUMBER buttons (0..9) or the UP / DOWN button to select a programme number you want. • Locate the selection bar on the Manual tune at the Install menu. • Select the system with Picture(Cyan) button. Select the "SECAM-F" for a French stations and "PAL or SECAM" for the others. • Press the RIGHT or LEFT button. A tuning screen will appear and a cursor will move from left to right / from right to left. If you want to stop tuning, press the MENU button.
PAGE 10
DAILY USE RECALL The RECALL button is used to display the current status: programme number, station name, sound system, clock. This display appear for 2 seconds. SELECTING A PROGRAMME NUMBER The set has totally 100 programme numbers, 0..99. The NUMBER buttons 0..9 are used for direct programme selection. To select two-digit programme, press the second numbered button within two seconds. You can also select a programme number by pressing step by step the UP/DOWN buttons.
PAGE 11
SOUND CONTROL Sound • • • • Press the MENU button. Place the selection bar to the Sound with UP/DOWN button. Press the RIGHT button to call up Sound menu. Select the required function by moving the selection bar ith the UP / DOWN buttons. • Press the RIGHT button to call up the each sub-menus. Equalizer Pro Logic Balance Center Surround Dolby Noise M Equalizer : There are four possible choice considering your preference: "Favourite, Music, Speech, Flat".
PAGE 12
Automatic clock setting and correction Even though you turn the TV off with MAIN POWER (ON/OFF) button, if you select a programme of your country which has Teletext or PDC transmission, clock will be set and corrected automatically. This function is only available for the countries as follows: Deutschland, Great Britain, France, Italy, Sweden, Switzerland, Netherlands, Ireland SETTING THE WAKE UP TIME / PROGRAMME • Confirm the Clock is set.
PAGE 13
TELETEXT SWITCHING TELETEXT ON/OFF Press the TEXT button( ). The index page or the page viewed last will appear. Press the TEXT button again to return to the TV mode. COLOUR BUTTONS IN TOP/FLOF TELETEXT A red, green, yellow and blue field is shown at the bottom of the screen. If TOP or FLOF Teletext is transmitted by the station, pressing the corresponding colour button on the remote controller, you can select the desired page easily. SELECTING PAGES The NUMBER button 0..9 are used to enter a page number.
PAGE 14
BRIGHTNESS AND CONTRAST CONTROL IN TELETEXT MODE Pressing the MENU button repeatedly in teletext mode, the brightness and contrast control menu will be displayed in the bottom of the screen. You can adjust these using the LEFT/RIGHT button on the remote controller. DOUBLE WINDOW IN TEXT MODE You can simultaneously watch TV and Teletext screen by pressing the Zoom button in Teletext mode. CONNECTING EXTERNAL EQUIPMENT SCART JACK 1(AV1) & SCART JACK 2 (AV2) & SCART JACK 3(AV.
PAGE 15
TROUBLESHOOTING SYMPTOMS Neither picture nor sound: INSPECT • Is power code plugged in? Picture is OK, but no sound: • Check if Volume Down is pressed. • Check if the Volume control is set to the minimum position. Sound is OK, but no colour: • Check if the color control is set to the minimum position. • Check if the program on air is in color, or in black and white. • Check if the antenna installation and its connection is OK. • Check if the antenna direction is Overlapped Picture Image: correct.
PAGE 16
SPECIFICATIONS SYSTEM SCREEN SIZE MAIN VOLTAGE POWER CONSUMPTION DIMENSION SOUND SYSTEM SOUND OUTPUT NUMBER OF PROGRAM PAL/SECAM-B/K, PAL-I/I', SECAM-L/L' NTSC-3.58/4.43MHz(play back) 32"(30" Viewable) Real FLAT Tube AC 220 - 240V, 5OHz Stand-by mode : 2.0 Watts Normal operating mode : 180 Watts 890X572.