PLASMA DISPLAY USER’S MANUAL DP-42GP DP-42SP DP-42WP Help Line No. : 01189 252577 DAEWOO ELECTRONICS CO., LTD.
Features • 106cm (42”)super-wide, 8.0cm Ultra Slim Wall-mounting Monitor DAEWOO PLASMA opens a new era Monitor era with advanced plasma technology – 8cm ultra slim Monitor. Light weight of only 30kg allows installation in a narrow space. • DVD Direct Connection / Outstanding Picture Quality Digital Broadcasts Receive (SD Grade) DVD can be directly connected to the unit so that you can view clear digital images. You can enjoy even higher quality images.
F C C R F I N T E R F E R E N C E S TAT E M E N T NOTE : This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
Safety Precautions Power Always obey all safety messages. • All the safety and operating instructions should be read before the product is operated. If anything strange happens, unplug this product from the wall outlet. • Do not disassemble or replace any parts of the monitor. Refer to a qualified service personnel for repair. During a lightning storm, or when it is left unattended and unused for a long period of time, unplug it from the wall outlet.
While Using Monitor Do not open the cover (or back) because high voltage is present within the monitor’s enclosure. Never push objects of any kind into this product through openings at the back of the monitor. It may cause electric shock. It may cause fire or electric shock. No objects filled with liquids, such as vases, shall be placed on the monitor. Do not allow children to play or hang on the monitor. Do not place a candle or a lighted cigarette on the monitor.
Safety Precautions Power Always obey all safety messages. • All the safety and operating instructions should be read before the product is operated. CAUTION You can be injured or this product or any other of your property can be damaged if you don’t follow instructions. When moving your monitor, remove the power plug, antenna, and cables, and let at least two people move it by more than two people.. It can result in a risk of electric shock.
During Use CAUTION You can be injured or this product or any other of your property can be damaged if you do not follow instructions. Do not grip speakers when moving the monitor attached with speakers. When moving the monitor while gripping the speakers, the speakers may be fallen away from the monitor due to its weight, causing personal injury. Do not wipe the monitor using a cloth damped with chemicals (benzene, thinner, etc.). Do not place heavy objects or heat sources on the power cord.
Checking Accessories Note Check to be sure that the following items are packed with your Monitor. Supplied Accessories Remote Control You require a scart to A/V cable in the U,K.
Note Optional Accessories The following items are optional accessories. Refer purchasing optional accessories from Daewoo Electronics Local Dealer or the dealer from where you purchased the unit. Speakers DSP-SP20/SP21/SP22 - Speaker Main Unit Dimension : 100(W) x 628(H) 83(D)mm - Including Speaker Stand Dimension : 170(W) x 729(H) x 194(D)mm - Audio Amplifier : 8W + 8W - Impedance : 8Ω - Weight : 7.
CONTENTS PREPARATION 4 • Safety Precautions 12 • Panel Controls 13 • Remote control BASICS 14 • Installation Instructions 15 • Connecting Speaker to PDP CONNECTION 16 • Connecting PC APPLICATION 20 • 22 • 24 • 26 • 28 • 29 • 30 • 32 • 44 • Selecting Auto Picture Mode Adjusting Screen Size Adjusting Screen Position and Size Enlarging Screen Size Watching a Still Image Adjusting Auto Sound Mode Customizing Sound Mode Selecting MENU Background Screen and Languages Setting Sleep Timer MISCELLANY 35 • Befo
Panel Controls Front Panel, Back Panel, Remote Control having same names in Plasma Display and Remote Control would function in exactly the * Parts same way. Front Power STAND BY/OPERATE • Power control sensor • Power Standby: Red - Standby Select when adjusting volume or select/adjust “MENU.” Press when moving “MENU.
Remote Control Note • Use two “AAA” batteries. • Be sure to use replacement batteries of the same type as the original ones. • The life of a battery depends on how much it has been used. ) indicates the page in which * The number in ( the function of each button is explained in detail. INPUT SELECT POWER Input Select button Power button Used to select a desired input.
Installation Instructions When Using the Stand * When installing PDP Main Unit, be sure it is done by more than 2 professionals. * For detailed installation information, refer to the User’s Manual, “STAND”. 1 Take out the STAND from the package. 2 Smoothly fit the Stand to the Plasma Display Panel Separate the Protective Caps. (They are used when using for wall mounting, so store them.) 3 Engage the assembled stand with 4 screws (M5) enclosed.
Connecting the Speaker to the PDP 1 Connecting the Speaker to the Stand Be sure to check if there is a sponge attached to the surface on which the speaker is contacted. • By using a (-) driver or coin, fasten the special screw securely. Stand 2 Connecting the Speaker Cable • Connect one set (two cables) of the cable to the terminals on the back of the speaker in the way that red cable is for (+) terminal and black cable for (–) terminal.
Connecting PC Connecting PC • DAEWOO PLASMA supports resolution of VGA, SVGA, XGA, SXGA, UXGA. • Before connecting a PC to the PDP, be sure to adjust the resolution of PC. • This product is not supported by Plug and Play, so select Standard Monitor when setting PC monitor. 1 Before connecting to the PDP, set the resolution of the PC. • Go to SETUP-CONTROL PANEL-DISPLAY PROPERTIES in Window Screen. • Choose the SETTINGS tab in the DISPLAY Menu. • In the SETTINGS Menu, select 640x480 or 800x600.
3 Press the Power button. • Turn on the PDP and the PC. 4 Input Select INPUT SELECT PC • Select [PC] by pressing the INPUT SELECT button of the Remote Control or PDP unit. • Each time you press the INPUT SELECT button, a different input mode appears. The sequence is as follows: PC --> Component 1(RGB H/V) --> Component 1. Component1(RGB H/V) Component1 5 Enjoy Dynamic Ultra Screen Monitor by Using PC’s Keyboard or Mouse. NOTES: The resolution of the PC monitor is best at 640 x 480 (VGA).
PC Input Resolution Available in PDP Resolution 640x350 640x400 640x480 720x400 720x480 720x576 800x600 832x624 1024x768 1152x864 1152x900 1280x720 1280x960 1280x1024 1600x1200 18 Horizontal Frequency(KHz) Vertical Frequency(Hz) Remark 31.469 37.861 24.823 30.48 31.469 37.861 31.469 35 37.861 37.5 39.375 43.269 31.47 31.469 37.927 31.54 15.63 35.156 35.16 37.879 48.077 46.875 53.674 49.726 48.193(48.077) 48.363 53.95 56.476 60.241 60.023 68.677 80.66 70.84 54 63.851 67.5 77.094 61.796 71.
Selecting Auto Picture Mode 1 Selecting Picture Mode Selecting Auto Picture Mode • Press the [PICTURE MODE] on the Remote Control. • Pressing the [PICTURE MODE] first time will display the current PICTURE MODE. • Select the Picture modes that are automatically set depending on the kinds of pictures, and enjoy them. PICTURE MODE 2 Each Press of the Button Will Select One of Four Picture Modes. • Each time you press the button, a different Picture mode appears.
Customizing Picture Customizing Picture 1 Press the MENU Button. • The MENU shown below will display on the screen. MENU • You can adjust the colour tone and brightness to your preference. INPUT SELECT Picture Mode Sound Brightness Screen Contrast Utility Sharpness Input Color Temp. 2 VOL DISPLAY Press the / Normal Previous Select Move POWER Button. • After selecting [Picture] by the / buttons, press the button that will display the following.
4 Select User Mode Adjustments • While you are in [Picture Mode – User], press the select a specific adjustment item. VOL VOL Picture Mode Sound Brightness Screen Contrast Utility Sharpness Input Color Temp. buttons to Normal Normal Previous Adjust Move 5 / Picture Condition Adjustments VOL • Press the / preference. VOL buttons to adjust the picture of your Picture Mode Sound Brightness Screen Contrast Utility Sharpness Input Color Temp.
Adjusting Screen Size 1 Adjusting Screen Size • You can adjust screen size or aspect ratio as desired. Press the SCREEN MODE Button. • Each time you press the SCREEN MODE button on the Remote Control, a different SCREEN MODE appears. The sequence used is as follows: • The MENU shown below will display on the screen. SCREEN MODE 1) Component 1 select and DVD Input. 16:9 INPUT SELECT Panorama POWER Normal Enlarge LBS Enlarge LB 2) Component 1 select and DTV Input.
1 Press the MENU Button. Adjusting from MENU Screen • Press the [MENU] button on the Remote Control. MENU Picture Mode Sound Brightness Normal Screen Contrast Utility Sharpness Input Color Temp. Normal Previous Select Move 2 Select “Screen”. • Press the Channel VOL VOL / buttons to select “Screen.” Picture H. Size Sound V. Size Screen H. Position Utility V. Position Input Phase Frequency Previous Adjust Move 3 Select the Screen Size.
Adjusting Screen Position and Size Adjusting Screen Position and Size 1 Press the MENU Button. • The MENU screen as shown below will appear. MENU • You can adjust the screen position and size as desired. • This function is only used when adjusting the screen position and size on the PDP monitor by using the PC input signal. INPUT SELECT Picture Mode Sound Brightness Normal Screen Contrast Utility Sharpness Input Color Temp.
3 Press the Volume / VOL Buttons. • Press the Volume / buttons to select “Screen”. • While you are in ‘Screen’ mode, press the or button to select a desired item, and then, adjust the value by pressing the or . VOL Picture H. Size Sound V. Size Screen H. Position Utility V. Position Input Phase Frequency Move Previous Adjust NOTES: Horizontal/Vertical size and position values can be adjusted only in the [PC] input mode. H. Size: As the value increases, the screen width increases V.
Enlarging Screen Size 1 Enlarging Screen Size Press the ‘ZOOM+/ZOOM-’ Button. ZOOM+ • You can view an enlarged size of the screen with this function • Press the ‘ZOOM+’ button to show currently selected screen size. • Each time you press the ‘ZOOM+’ button, the screen size will increase stepwise in 0 ~ 20 scale. • To reduce the screen size, press the [ZOOM-] button.
2 Move the Screen Position. VOL • While you are in the ‘Zoom’ mode, press the / , / buttons to move screen stepwise up/down, left/right, respectively. VOL Zoom Level 6 NOTES: When the screen is enlarged, the pixel of the screen can become thick and dim. When only subtitle of zoom level remains, you can scroll the image. If subtitle of zoom level disappears, press zoom key, and scroll the image.
Watching a Still Image 1 Watching a Still Image • You can view still images temporarily with this function. However, displaying the same images such as still images for a long time may cause after-image lagging. Press the ‘FREEZE’ Button. • If you wish to freeze a picture, press the ‘FREEZE’ button. You can still hear the sound. • Press FREEZE button to cancel the ‘FREEZE’ function. • To view the enlarged images, press the [ZOOM+] button. FREEZE Freeze INPUT SELECT POWER 2 Move the Screen Position.
Adjusting Auto Sound Mode 1 Select SOUND Mode. • Press the [SOUND MODE] on the Remote Control. • Press of the [SOUND MODE] for the first time will display the current SOUND MODE. SOUND MODE 2 Adjusting Auto Sound Mode • Enjoy various sound modes by selecting your favorite Sound Mode depending on the kinds of moving pictures. Every Press of the Button Changes Modes. INPUT SELECT POWER • Each time you press the button, a different sound mode appears.
Customizing Sound Mode Customizing Sound Mode 1 Press the MENU Button. • The MENU Screen as below will be displayed. MENU • This feature allows the user at adjust at his preference. Picture Mode Sound Brightness Normal Screen Contrast Utility Sharpness Input Color Temp. Previous Select Move INPUT SELECT Normal POWER 2 Press the / Button. • Select [SOUND] by the / buttons, then press the button to display the following.
4 Select the Spatial Effect Mode. • Select Spatial Effect by pressing the / buttons, then select ON/OFF by pressing the button. • Spatial Effect: Used for emphasizing ther stereo effect. VOL VOL Picture Balance Sound Spatial Effect On Screen Sound Mode Normal Utility Input Previous Adjust Move 5 Select the SOUND Mode. • Select the Sound Mode by pressing the adjust it by pressing the / buttons.
Selecting MENU Background Screen and Language 1 Selecting Languages Press the MENU Button. • The MENU screen will be displayed as below. MENU • Used to select transparency of the background screen and language used in MENU. Picture Mode Sound Brightness Normal Screen Contrast Utility Sharpness Input Color Temp. Normal Previous Select Move INPUT SELECT POWER 2 Press the / Button. • Select [Utility] by the VOL VOL DISPLAY / button.
4 Select MENU LANGUAGE SELECT by the Button. VOL / • Select LANGUAGE by the / button. • Every press of the button while you are in the [LANGUAGE] mode would cycle through the different languages. VOL Picture Background Sound Language Screen Initialize Opaque English Press key Utility Input Previous Adjust Move NOTES: * When Power is turned ON first time, ‘SELECT LANGUAGE’ Mode will be displayed, then, select a desired language by button.
Setting Sleep Timer 1 Setting Sleep Timer • SLEEP TIMER turns the Monitor off after a preset time. INPUT SELECT Press the SLEEP Button. SLEEP • Press the [SLEEP] button on the Remote Control. • Pressing the [SLEEP] button first time will display the current setting for the SLEEP TIMER. • To cancel the SLEEP TIMER, press the [SLEEP] button to select ‘OFF’.
Before Requesting Service Before requesting for a service, check the following points once again. St y o mm ps • Remote control does not function properly. • The Display makes a snapping sound. • There are empty sections at the top and the bottom area of the screen. C h e c k s • Check for any obstacle between the Remote Control and the Display. • Check for dead batteries and incorrect battery orientation. • Check if the Remote Control is the right one. • Check if the pictures and sound are normal.
SPECIFICATIONS DISPLAY UNIT Model DP-42GP, DP-42SP, DP-42WP Diagonal Size 106cm (42”) Screen Aspect Ratio 16 : 9 Display Resolution 853(H) X 480(V) dots Pixel Pitch 1.08(H) X 1.08(V) mm Output Colour 16,770,000 Colors Contrast Ratio 3000 : 1 Video Signal VGA, SVGA, XGA, SXGA, UXGA Dimension 1039(W) X 628(H) X 80(D) mm Weight 47Kg (with Stand) Power Consumption 320W Power Requirement AC 100-240V, 50/60Hz, 3.2-1.
