User's Manual

Fig.5a

OPERATING INSTRUCTING FOR THE AIR CONDITIONER

Before Starting This Unit

1) Select a suitable location, make sure you have easy access to an electrical outlet.

2) Install the Flexible Exhaust Hose and the Adjustable Window Slider Kit as depicted in Fig.5 &

Fig.5a

Fig.5

NOTE: Step 2 is required only while using the cooling mode

3) Plug the unit into a 115V~60Hz grounded electrical outlet.

4) Make sure the water pump drain hose is correctly installed.

¡¡ 5) Press the on / off button to turn on the unit.

1 BEFORE USE

Dehumidifying and Cooling Operations

OOOO

- The operating range for cooling operating is 17 C-30 C/63 F-86 F.

- If the cooling or dehumidifying operations have been switched off and need switching on again

in a short time, allow approximately three minutes for the cooling or dehumidifying operations

to resume.

- Make sure the water pump drain hose is correctly connected to the unit.

Power supply:

- Insert the AC Power Plug to a AC socket.

- Do not connect the air conditioner to a multiple socket outlet which is also being used for other

electrical appliance.

- Be sure the power supply is AC 115V~ 60Hz.

Water pump drain hose

Fig.6