User's Manual














Auto Tuning Access
Manual Tuning Access
Setup Access
Edit Access
Select Access Exit
Picture
Screen
Sound
Install
Function
DVB
Access Exit
Manual Tuning
Pr08 Euro
Setting Up TV
Stations
Manual tuning
1. Press the Number buttons ( 0…9 ) or the “ PR ” but-
ton to select a program number you want.
2. Locate the selection bar on the Manual tuning at the
Install menu.
• Press the “ MENU ” button to select the Install menu.
• Move the selection bar to the Install menu with “/”
buttons.
• Place the selection bar on Manual Tuning and press
the “” button.
3. Execute Manual Tuning.
• A tuning screen will appear and cursor will move from
left to right / from right to left. If you want to stop tun-
ing press the “ MENU ” button.
• You should press the “ OK ” button to store a program
then the PR number is changed to red. If you don’t want
to store the program, press “/“ button to skip the
program.
• To store another program, select other PR number us-
ing “/” buttons and press “/“ buttons.
Note :
• If you are unable to get any programs using Auto Tuning due to a poor broadcasting signal, it may still be possible
to store channels using the Manual tuning.
• If present channel is SECAM L/L’, TV set search SECAM L/L’. And, if present channel is not SECAM L/L’, TV set search
all channels except SECAM L/L’.