User's Manual







Parts of the Remote
Control
1. MUTE : Press this button, and the sound goes off.
Press again, and the sound returns.
2.
POWER : TV on/off button in STANDBY mode.
3.
DVB/Analogue : Each time you press this button, the TV will toggle
between DVB & RF Analogue. Also you can come back to the cur-
rent TV mode from any External mode.
4.
AV : Each time you press this button, the TV will cycle through:
TV  AV1  AV2  Component  HDMI  PC  TV
5.
SLEEP : Sleep Timer setting.
SLEEP TIMER : OFF  15  30  45  60  75  90  105 120
 OFF
6.
NUMBER : Using the numbers buttons on this board, you can se-
lect programmes directly.
7.
S.EFFECT : Using this button, you can listen to the virtual sur-
round sound. The sound will cycle through:
Off  SPATIAL  3D Panorama  Off
8. MTS : You can select sound modes in Mono, Stereo, Dual1,
Dual2, NICAM STEREO. This works only in TV mode.
9. 
VOL  : Adjusts the volume.
10. 
PR/PAGE  : Changes the programme on your TV.
11. / : Moves the cursor up/down in the menu.
12. / : Accesses and adjusts items in the menu.
13.
OK/SELECT : Auto Tuning Start and Manual Tuning Store.
14.
GUIDE (digital mode only): Moves to EGP in DVB mode direct-
ly. See page 34.
15. SUBTITLE (digital mode only): Selects the Subtitle On/Off in the DVB
MENU directly, or shows the subtitle if it has on in the DVB MENU.
See page 31.