User's Manual

Picture

Auto Tuning

Manual Tuning

Setup

Edit

Screen

Sound

Func tion

Position Access Exit

Install

Manual Tuning

Pr 01 PAL / SECAM

PR Change Access

ExitStore

Setting Up TV

Stations

Manual tuning

1. Press the Number buttons(0~9) or the “ ” button to select

a program number you want.

Locate the selection bar on the Manual tuning at the Install menu.

• Press the “MENU” button to select the Install menu.

• Move the selection bar to the Install menu with “ ” buttons.

• Place the selection bar on Manual Tuning and press the “ ”

button.

3. Press the “ ” buttons.

• A tuning screen will appear and cursor will move from left to right /

from right to left. If you want to stop tuning press the “MENU” but-

ton.

• After searching a station, you must press the “OK” button to store

the Program.

Note :

• If you are unable to get any programs using Auto Tuning because of a poor broadcasting signal, it is possible to store

the Manual tuning.

• When you enter Manual Tuning after Auto Tuning in France or Swiss, if present channel is SECAM L/L’, TV set can only

search SECAM L/L’.

• If you enter by other than by SECAM L/L’ signal, TV set can search every by SECAM L/L’ signal except SECAM L/L’.

• You can change the Programme number in the Edit mode.

• Manual tuning does not support this function.