Owner's Manual

11
[Preset Memory Setting]
Select the radio band and tune in a desired radio stations you wish to store in the preset memory.
Press and hold, for at least 2 seconds, any one of the preset memory setting (1 to 6) into which you wish to save the
station.
• The selected station is stored.
• The display shows the band and station frequency memorized.
A Total of 18 stations can be in the preset memory. (6 stations for each band: FM1, FM2 and AM)
If you store a station in a preset memory which already has a station, the current station will be cleared and replaced with
the new station.
[Auto-Memory]
Press BAND repeatedly until the desired radio band is displayed.
The frequency on the display continues to change while the automatic memory is in progress. The tuner will
automatically seek and store 6 strong stations in the selected band. They will be stored into preset buttons 1 to 6 in order
of signal strength, when the automatic memory has been completed, the tuner goes to the station stored in preset location
No. 1
If no stations are stores, the tuner will return to the original station you were listening to before the auto memory
procedure began.