Specifications

7-14

FLANGE NUT

BELT TYPE CONTINUOUSLY VARIABLE TRANSMISSION / KICK STARTER

● Assemble drive face to the serration side of LH.

Crank shaft, then assemble hext nut 12mm.

● By using drive face holde, fasten drive face nut.

TORQUE : 5.5kgf

TOOL : DRIVE FACE

NOTE

•Assemble drive pulley nut as specified torque.

•Assemble by completely fitting drive face and

crankshaft sereration.

•Fix fly wheel to universal holder if drive pulley

holder can not be used.

● Assemble 2 dowel pins and gasket

● Assemble LH. Side cover .