Specifications

6. ENGINE REMOVAL/INSPECTION
SERVICE INFORMATION
·····
6-1
ENGINE REMOVAL/ASSEMBLY
··
6-2
SERVICE INFORMATION
GENERAL SAFETY
NOTE
•Use a jack to remove or install the engine. Support the motorcycle with a jack firmly, taking precautions not to
damage the frame, engine, cable or harness.
•Attach tape to the frame to protect it during the engine removal or installation.
● The following works can be carried out without removing the engine from the vehicle body.
-TRANSMISSION (⇨SECTION 11)
-A.C. GENERATOR (⇨SECTION 8)
-KICK STARTER/ CONTINUOUSLY VARIABLE TRANSMISSION (⇨SECTION 7)
-STATOR MOTOR (⇨SECTION 16)
-CARBURETOR (⇨SECTION 5)
-EX. MUFFLER (⇨SECTION 3)
● Items to be worked after removing engine.
-CYLINDER HEAD, CYLINDER, CRANK SHAFT, CRANK SHAFT BEARING
● Engine oil capacity : 0.85L(when disassembling)
TORQUE VALUES
ENGINE HANGER BOLT : 4.5㎏f·m