Specifications

AIR GUN
AIR GUN
AIR GUN
AIR GUN
AIR GUN
AIR GUN
AIR GUN
AIR GUN
AIR GUN
AIR GUN
AIR GUN
AIR GUN
AIR GUN
AIR GUN
AIR GUN
AIR GUN
AIR GUN
AIR GUN
AIR GUN
AIR GUN
AIR GUN
AIR GUN
PISTON SEAL
PISTON SEAL
PISTON SEAL
PISTON SEAL
PISTON SEAL
PISTON SEAL
PISTON SEAL
PISTON SEAL
PISTON SEAL
PISTON SEAL
PISTON SEAL
PISTON SEAL
PISTON SEAL
PISTON SEAL
PISTON SEAL
PISTON SEAL
PISTON SEAL
PISTON SEAL
PISTON SEAL
PISTON SEAL
PISTON SEAL
PISTON SEAL
DUST SEAL
DUST SEAL
DUST SEAL
DUST SEAL
DUST SEAL
DUST SEAL
DUST SEAL
DUST SEAL
DUST SEAL
DUST SEAL
DUST SEAL
DUST SEAL
DUST SEAL
DUST SEAL
DUST SEAL
DUST SEAL
DUST SEAL
DUST SEAL
DUST SEAL
DUST SEAL
DUST SEAL
DUST SEAL
CALIPER BODY
CALIPER BODY
CALIPER BODY
CALIPER BODY
CALIPER BODY
CALIPER BODY
CALIPER BODY
CALIPER BODY
CALIPER BODY
CALIPER BODY
CALIPER BODY
CALIPER BODY
CALIPER BODY
CALIPER BODY
CALIPER BODY
CALIPER BODY
CALIPER BODY
CALIPER BODY
CALIPER BODY
CALIPER BODY
CALIPER BODY
CALIPER BODY
PISTON
PISTON
PISTON
PISTON
PISTON
PISTON
PISTON
PISTON
PISTON
PISTON
PISTON
PISTON
PISTON
PISTON
PISTON
PISTON
PISTON
PISTON
PISTON
PISTON
PISTON
PISTON
MICROMETER
MICROMETER
MICROMETER
MICROMETER
MICROMETER
MICROMETER
MICROMETER
MICROMETER
MICROMETER
MICROMETER
MICROMETER
MICROMETER
MICROMETER
MICROMETER
MICROMETER
MICROMETER
MICROMETER
MICROMETER
MICROMETER
MICROMETER
MICROMETER
MICROMETER
FRONT WHEEL / FRONT BRAKE / FRONT FORK / STEERING STEM
REMOVAL
● Remove the pad spring, pad comp, caliper bracket,
boot from the caliper body.
● If there is any wear or damage in the boot, replace it
with a new one.
● Wrap the caliper with a piece of cloth to avoid piston
and brake fluid leakage and facing the piston
downward.
● Remove the piston from the caliper while blowing
the low-pressure air in the opening of the brake hose.
NOTE
•Never use the high-pressure air or bring the air gun
too close.
•Never touch the inside of the caliper.
● Remove the piston seal and dust seal.
● Clean the piston and inside of the caliper with the
brake fluid.
NOTE
•Pay attention not to damage the inner surface of the
caliper.
INSPECTION
● Check the caliper bore for scoring, scratches, or
other fluid.
● Check the caliper piston outer diameter part for
scratches or other damage.
● Measure the piston outer diameter.
SERVICE LIMIT : 24.889MM