Specifications

OIL CUP CAP
DIAPHRAGM
PLATE
DIAPHRAGM
SPRING
CYLINDER
CYLINDER
CYLINDER
CYLINDER
CYLINDER
CYLINDER
CYLINDER
CYLINDER
CYLINDER
CYLINDER
CYLINDER
CYLINDER
CYLINDER
CYLINDER
CYLINDER
CYLINDER
CYLINDER
CYLINDER
CYLINDER
CYLINDER
CYLINDER
CYLINDER
CYLINDER
PRIMARY CUP
PRIMARY CUP
PRIMARY CUP
PRIMARY CUP
PRIMARY CUP
PRIMARY CUP
PRIMARY CUP
PRIMARY CUP
PRIMARY CUP
PRIMARY CUP
PRIMARY CUP
PRIMARY CUP
PRIMARY CUP
PRIMARY CUP
PRIMARY CUP
PRIMARY CUP
PRIMARY CUP
PRIMARY CUP
PRIMARY CUP
PRIMARY CUP
PRIMARY CUP
PRIMARY CUP
CIR CLIP
BOOT
SECONDARY CAP
SECONDARY CAP
SECONDARY CAP
SECONDARY CAP
SECONDARY CAP
SECONDARY CAP
SECONDARY CAP
SECONDARY CAP
SECONDARY CAP
SECONDARY CAP
SECONDARY CAP
SECONDARY CAP
SECONDARY CAP
SECONDARY CAP
SECONDARY CAP
SECONDARY CAP
SECONDARY CAP
SECONDARY CAP
SECONDARY CAP
SECONDARY CAP
SECONDARY CAP
SECONDARY CAP
LEVER
STOP SWITCH
MASTER CYLINDER BODY
FRONT WHEEL / FRONT BRAKE / FRONT FORK / STEERING STEM
● Remove the cylinder, spring from the master
cylinder.
● Clean the inside of master cylinder, reserve, master
piston with the brake fluid.
INSPECTION
● Check the piston periphery for scores, scratched or
nicks.
● Check the primary and secondary cups for wear.
NOTE
•If there is any leak of fluid, when installing new
piston, it may indicate the side wear of the cylinder
by the direction of the piston contacting face. In
this case, the master cylinder must be replaced
also.
● Check the master cylinder for scores, scratched or
nicks and replace if necessary.
ASSEMBLY
CAUTION
•Replace the piston, spring, cups and snap ring as a
set.
•Be sure that each part is free from dust or dirt
before reassembly.
•When cleaning with the brake fluid, use the
specified brake fluid.
● Apply the recommendatory brake fluid to the cup,
cylinder and inside of cylinder, and install the
spring, primary cup, piston.