Specifications

FRONT AXLE

BEARING REMOVER HEAD

ROLL

FRONT WHEEL / FRONT BRAKE / FRONT FORK / STEERING STEM

INSPECTION

● Check the front axle for deflection. Place the front

axle on a V-block, and measure deflection with a dial

gauge.

SERVICE LIMIT: 0.2 MM

● Place the front wheel on an inspection stand. Slowly

turn the wheel, and check the rim for wobbles with a

dial gauge.

SERVICE LIMIT: RADIAL 2.0MM

AXIAL 2.0 MM

FRONT WHEEL BEARING

INSPECTION

● Turn the inner race of each bearing with finger.

Bearing should turn smoothly and quietly. Also

check that the bearing outer race fits tightly in the

hub. If the bearing is worn, replace the new one.

REMOVAL

● Install the bearing remover head and the remover

shaft on the wheel and remove the bearing and

distance collar.

TOOL: BEARING REMOVER HEAD

BEARING REMOVER