Specifications

FLANGE BOLT

TRANSMISSION/CRANKSHAFT/CRANKCASE

CRANK CASE INSTALLATION

● Install the dowel pins and a new gasket.

● Pulling the cam chain and check to see if the

crankshaft installed correctly.

● Install the RH. Crankcase to the LH. crank case.

● Assemble one RH. Crank case flange bolt.

● Regarding the installing the engine assy, refer to the

manual.

● Install the engine to the frame(-> section 6).

NOTE

•Make sure that the gasket is completely attached

without any clearance.